5.0/ 5.0
100% pembeli merasa puas
3 rating • 1 ulasan
5(3)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 22
Subtotal
Rp178.000
2 Channel Wireless RF Remote Control Switch Transmitter Receiver
Rp178.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Aneka Hoby
selamat datang ditoko kami selamat berbelanja.
Barang yg kami jual adalah barang yang berkualitas dan bergaransi 1 bulan
1. Operating Voltage: 12V
2. Control Channel: 2 Channels
3. Work: jog or self-lock
4. Supporting remote control: 50 ~ 100m
Receiver parameters:
1) Operating voltage: DC12V
2) Working frequency: 315MHZ
3) Contact capacity: 10A/250VAC or 30VDC
4) Receiver sensitivity:>-105dB
5) Remote control distance: 50 ~ 100m
6) Control approach: four normally open (normally closed) contacts
7) Encoding type: fixed code; pad code
Remote control:
1) Operating voltage: DC12V
2) Operating Current: 10mA
3) Operating frequency: 315MHz
4) Transmission Distance: 50 ~ 100m
5) Encoding type: fixed code; pad code
Mode:
Jog: tekan tombol ON. Lepas tombol yang sama OFF.
Self -lock: tekan tombol ON, tekan tombol yang sama lagi OFF.
Inter-lock: tekan tombol ON, tekan tombol yang lain OFF. (Satu saluran perlu 2 tombol remote control).
Learning and remove method
1. Press the first learning code, the indicator flash, loosen your finger, press first button of the remote control ,the indicator flash 2 times and off; press the second learning code, the indicator flash, loosen your finger, press second button of the remote control ,the indicator flash 2 times and offit mean you learn it successfully.
2. Remove/clean: press the learning button about 8 seconds, the indicator turn on to off, it means the information that you keep have been removed successfully .
Cara mengganti mode:
Tekan terus tact switch pada receiver, maka LED akan menyala (masih ditekan), LED akan mati, dan berkedip 1 kali, berkedip 2 kali, dan berkedip 3 kali. Lepas tombol tact switch pada kedipan (mode) yang dikehendaki. Jog kedipan 1x, self-lock kedipan 2s, inter-lock kedipan 3x.
Setelah itu pairing ulang dengan menekan tact switch sampai LED menyala dan lepas tekanan. Kemudian tekan tombol A dan B pada remote control.
Isi Paket:
1 x Receiver Board 2 Channel
1 x Remote Controller
Terimakasih
Barang yg kami jual adalah barang yang berkualitas dan bergaransi 1 bulan
1. Operating Voltage: 12V
2. Control Channel: 2 Channels
3. Work: jog or self-lock
4. Supporting remote control: 50 ~ 100m
Receiver parameters:
1) Operating voltage: DC12V
2) Working frequency: 315MHZ
3) Contact capacity: 10A/250VAC or 30VDC
4) Receiver sensitivity:>-105dB
5) Remote control distance: 50 ~ 100m
6) Control approach: four normally open (normally closed) contacts
7) Encoding type: fixed code; pad code
Remote control:
1) Operating voltage: DC12V
2) Operating Current: 10mA
3) Operating frequency: 315MHz
4) Transmission Distance: 50 ~ 100m
5) Encoding type: fixed code; pad code
Mode:
Jog: tekan tombol ON. Lepas tombol yang sama OFF.
Self -lock: tekan tombol ON, tekan tombol yang sama lagi OFF.
Inter-lock: tekan tombol ON, tekan tombol yang lain OFF. (Satu saluran perlu 2 tombol remote control).
Learning and remove method
1. Press the first learning code, the indicator flash, loosen your finger, press first button of the remote control ,the indicator flash 2 times and off; press the second learning code, the indicator flash, loosen your finger, press second button of the remote control ,the indicator flash 2 times and offit mean you learn it successfully.
2. Remove/clean: press the learning button about 8 seconds, the indicator turn on to off, it means the information that you keep have been removed successfully .
Cara mengganti mode:
Tekan terus tact switch pada receiver, maka LED akan menyala (masih ditekan), LED akan mati, dan berkedip 1 kali, berkedip 2 kali, dan berkedip 3 kali. Lepas tombol tact switch pada kedipan (mode) yang dikehendaki. Jog kedipan 1x, self-lock kedipan 2s, inter-lock kedipan 3x.
Setelah itu pairing ulang dengan menekan tact switch sampai LED menyala dan lepas tekanan. Kemudian tekan tombol A dan B pada remote control.
Isi Paket:
1 x Receiver Board 2 Channel
1 x Remote Controller
Terimakasih
Ada masalah dengan produk ini?