5.0/ 5.0
100% pembeli merasa puas
5 rating • 4 ulasan
5(5)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: Sisa 10
Subtotal
Rp9.500
Thermal Glue Heat sink Adhesive Lem Heatsink Thermal Plaster
Rp9.500
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Komponen Elektronik - Led - Pencahayaan
Thermal Paste Adhesive
Thermal conductivity > 0.671W / mk;
Breaking strength 1.5MPA ;
Surface curing time 10MIN / 25
Operation Manual:
When it is used, the product is directly extruded, rubbed and glued to the surface of the adhesive, and then covered immediately after the test, so as to be tried
surface fixed speed is related to the relative humidity and temperature in the air; the higher the temperature, the faster the curing rate is, the slower the vice versa.
Recommended coating thickness: 0.1-0.5mm, the thinner the
use, please clean with solvent (such as alcohol) adhesive surface, detergents should be surface to be clean before painting
untuk 1 bh Thermal Adhesive Stars 922 5g
Thermal conductivity > 0.671W / mk;
Breaking strength 1.5MPA ;
Surface curing time 10MIN / 25
Operation Manual:
When it is used, the product is directly extruded, rubbed and glued to the surface of the adhesive, and then covered immediately after the test, so as to be tried
surface fixed speed is related to the relative humidity and temperature in the air; the higher the temperature, the faster the curing rate is, the slower the vice versa.
Recommended coating thickness: 0.1-0.5mm, the thinner the
use, please clean with solvent (such as alcohol) adhesive surface, detergents should be surface to be clean before painting
untuk 1 bh Thermal Adhesive Stars 922 5g
Ada masalah dengan produk ini?