4.8/ 5.0
100% pembeli merasa puas
4 rating • 1 ulasan
5(3)75%
4(1)25%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: Sisa 1
Subtotal
Rp29.000
Arduino A3967 EasyDriver Stepper Motor Driver
Rp29.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Modul - Modul
Sebelum Order Tanya stok dulu via diskusi atau cek stok di web resmi jogjarobotika ( buka web jogjarobotika com search nama produk)
Toko kami sudah berpengalaman sejak 2011 di bidang penjualan sparepart online/offline.
Pengiriman komponen anda aman dengan packing dus dan bubble pack.
+==================================================================+
Detail : Cek Gambar
Harga adalah untuk 1pcs
+==================================================================+
Arduino A3967 EasyDriver Stepper Motor Driver
The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver). The EasyDriver requires a 6V to 30V supply to power the motor and can power any voltage of stepper motor. The EasyDriver has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V. Connect a 4-wire stepper motor and a microcontroller and you'''ve got precision motor control! EasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors.
Features:
A3967 Microstepping Driver
MS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth)
Compatible with 4, 6, and 8 wire stepper motors of any voltage
Adjustable current control from 150mA/phase to 700mA/phase
Power supply range from 6V to 30V. The higher the voltage, the higher the
Toko kami sudah berpengalaman sejak 2011 di bidang penjualan sparepart online/offline.
Pengiriman komponen anda aman dengan packing dus dan bubble pack.
+==================================================================+
Detail : Cek Gambar
Harga adalah untuk 1pcs
+==================================================================+
Arduino A3967 EasyDriver Stepper Motor Driver
The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver). The EasyDriver requires a 6V to 30V supply to power the motor and can power any voltage of stepper motor. The EasyDriver has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V. Connect a 4-wire stepper motor and a microcontroller and you'''ve got precision motor control! EasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors.
Features:
A3967 Microstepping Driver
MS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth)
Compatible with 4, 6, and 8 wire stepper motors of any voltage
Adjustable current control from 150mA/phase to 700mA/phase
Power supply range from 6V to 30V. The higher the voltage, the higher the
Ada masalah dengan produk ini?