5.0/ 5.0
100% pembeli merasa puas
25 rating • 6 ulasan
5(24)96%
4(1)4%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 99
Subtotal
Rp42.000
ATTiny85 ATTiny 85 Digispark USB Development Board
Rp42.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Arduino & Shield
Sebelum Order Tanya stok dulu via diskusi atau cek stok di web resmi jogjarobotika ( buka web jogjarobotika com search nama produk)
Toko kami sudah berpengalaman sejak 2011 di bidang penjualan sparepart online/offline.
Pengiriman komponen anda aman dengan packing dus dan bubble pack (free).
+==================================================================+
Detail : Cek Gambar
Harga adalah untuk 1 set
+==================================================================+
Digispark USB Development Board
smaller, and a bit less powerful. With a whole host of shields to extend its functionality and the ability to use the familiar Arduino IDE the Digispark is a great way to jump into electronics, or perfect for when an Arduino is too big or too much.
The Digispark is shipped fully assembled except for the two included and easy to solder headers.
Here are the specs:
Support for the Arduino IDE 1.0+ (OSX/Win/Linux)
Power via USB or External Source - 5v or 7-35v (12v or less recommended, automatic selection)
On-board 500ma 5V Regulator
Built-in USB
6 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB)
8k Flash Memory (about 6k after bootloader)
I2C and SPI (vis USI)
PWM on 3 pins (more possible with Software PWM)
ADC on 4 pins
Power LED and Test/Status LED
https://startingelectronics.org/tutorials/arduino/digispark/digispark-windows-setup/
Toko kami sudah berpengalaman sejak 2011 di bidang penjualan sparepart online/offline.
Pengiriman komponen anda aman dengan packing dus dan bubble pack (free).
+==================================================================+
Detail : Cek Gambar
Harga adalah untuk 1 set
+==================================================================+
Digispark USB Development Board
smaller, and a bit less powerful. With a whole host of shields to extend its functionality and the ability to use the familiar Arduino IDE the Digispark is a great way to jump into electronics, or perfect for when an Arduino is too big or too much.
The Digispark is shipped fully assembled except for the two included and easy to solder headers.
Here are the specs:
Support for the Arduino IDE 1.0+ (OSX/Win/Linux)
Power via USB or External Source - 5v or 7-35v (12v or less recommended, automatic selection)
On-board 500ma 5V Regulator
Built-in USB
6 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB)
8k Flash Memory (about 6k after bootloader)
I2C and SPI (vis USI)
PWM on 3 pins (more possible with Software PWM)
ADC on 4 pins
Power LED and Test/Status LED
https://startingelectronics.org/tutorials/arduino/digispark/digispark-windows-setup/
Ada masalah dengan produk ini?