DSO150 DIY Digital Oscilloscope Kit

Sebelum Order Tanya stok dulu via diskusi atau cek stok di web resmi jogjarobotika ( buka web jogjarobotika com search nama produk)
Toko kami sudah berpengalaman sejak 2011 di bidang penjualan sparepart online/offline.
Pengiriman komponen anda aman dengan packing dus dan bubble pack.

+==================================================================+
*Detail Cek Gambar

DSO150 DIY Digital Oscilloscope Kit Upgraded Version


Shell oscilloscope uses 9V DC power supply (the power supply voltage should not exceed 10V! Otherwise it may burn the machine). The kit itself does not include a power supply. Users need to prepare the power supply by themselves. The power supply current should be able to provide more than 200mA.

Characteristic index:

Real-time sampling rate: 1Msps
Precision: 12Bit
Sampling buffer depth: 1024 bytes
Analog bandwidth: 0-200KHz
Vertical sensitivity: 5mV/Div – 20V/Div (according to the 1-2-5 way)
Adjustable vertical displacement, with instructions
Input impedance: 1MΩ
Input voltage: 50Vpp (1:1 probe), 400Vpp (10:1 probe)
Coupling methods include DC/AC/GND
Horizontal time base range: 10μs/Div-50s/Div (increase by 1-2-5)
With automatic, regular and single trigger modes, it is convenient to capture instant waveforms
Can be triggered by rising or falling edge
Trigger level position is adjustable, with indication
Observe the waveform before the trigger (negative delay)
Freeze the waveform display at any time (HOLD function)
Comes with 1KHz /3.3V square wave test signal source
With digital display of waveform parameters, the parameters that can be displayed are: frequency, period, pulse width, duty cycle, value, minimum value, average value, peak-to-peak value, effective value
Save/recall the waveform, the waveform does not disappear when turned off
.

Dimensi: 102x73x21mm

sudah 1 paket tinggal pakai, tidak perlu rakit merakit
isi paket :
1x DSO150
1x BNC Probe
1x Probe japit buaya
1x Adaptor 9V