4.8/ 5.0
100% pembeli merasa puas
6 rating • 0 ulasan
5(5)83.33%
4(1)16.67%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok: Tidak Dijual
Subtotal
-
L9110 L9110S H-Bridge Stepper Motor Dual DC Motor Driver Module
Rp8.000
Sebelum Order Tanya stok dulu via diskusi atau cek stok di web resmi jogjarobotika ( buka web jogjarobotika com search nama produk)
Toko kami sudah berpengalaman sejak 2011 di bidang penjualan sparepart online/offline.
Pengiriman komponen anda aman dengan packing dus dan bubble pack.
+==================================================================+
Detail : Cek Gambar
Harga adalah untuk 1pcs
The L9110S Dual Channel Motor Driver Module is a compact board that can be used to drive very small robots. This tiny module has two independent L9110Smotor driver chips which can each drive up 800mA of continuous current. The boards can be operated from 2.5V to 12V enabling this module to be used with both 3.3V and 5V microcontrollers. A set of male header pins is used to connect this module to your robot'''s microcontroller brain. The motors are attached via two sets of screw terminals. A PWM Pulse Width Modulation signal is used to control the speed of a motor and a digital output is used to change its direction. This module can also be used to drive a single four line two phase stepper motor. Four holes make this board easy to mount onto your robot or other project.
Specification
Motor Voltage: 2.5 ~12V
Motor channels: 2
Max Continuous Current per Channel: 800mA
Size: 31mm x 22mm x 12mm
Wiki & External links
Toko kami sudah berpengalaman sejak 2011 di bidang penjualan sparepart online/offline.
Pengiriman komponen anda aman dengan packing dus dan bubble pack.
+==================================================================+
Detail : Cek Gambar
Harga adalah untuk 1pcs
The L9110S Dual Channel Motor Driver Module is a compact board that can be used to drive very small robots. This tiny module has two independent L9110Smotor driver chips which can each drive up 800mA of continuous current. The boards can be operated from 2.5V to 12V enabling this module to be used with both 3.3V and 5V microcontrollers. A set of male header pins is used to connect this module to your robot'''s microcontroller brain. The motors are attached via two sets of screw terminals. A PWM Pulse Width Modulation signal is used to control the speed of a motor and a digital output is used to change its direction. This module can also be used to drive a single four line two phase stepper motor. Four holes make this board easy to mount onto your robot or other project.
Specification
Motor Voltage: 2.5 ~12V
Motor channels: 2
Max Continuous Current per Channel: 800mA
Size: 31mm x 22mm x 12mm
Wiki & External links
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan