Waveshare Night Vision Camera Light Sense IR LED Board for Raspberry

Sebelum Order Tanya stok dulu via diskusi atau cek stok di web resmi jogjarobotika ( buka web jogjarobotika com search nama produk)
Toko kami sudah berpengalaman sejak 2011 di bidang penjualan sparepart online/offline.
Pengiriman komponen anda aman dengan packing dus dan bubble pack (free).

+==================================================================+
Detail : Cek Gambar
Harga adalah untuk 1 pcs
+==================================================================+
Waveshare Night Vision Camera Light Sense IR LED Board for Raspberry
Features
3W high-power 850 infrared LED
Onboard photoresistor, the ambient light detector
Onboard adjustable resistor, for controlling the ambient light threshold of toggling the infrared LED
Allows adding night vision function to RPi Camera (E) or RPi Camera (F)
How to Use
Connect the Infrared LED Board to the camera PCB by screws
The screw holes are used for both attachment and power supply
Adjust the adjustable resistor to set a proper ambient light threshold, which toggles the infrared LED automatically
When ambient light is lower than threshold value, the infrared LED is on, vice versa


NOTE : TIDAK SUPPORT UNTUK RASPBERRY CAMERA OFFICIAL (500W Pixel, Camera Raspberry V2,NoiR Camera)


WARNING :
Limited by the Raspberry Pi power supply, the 3W high-power infrared LED might cause the Pi to increase heating, heat sinks are suggested.
Ideal imaging distance is within 3m. When the distance goes up to 6m, the night vision camera can just capture blurry outlines.

https://www.waveshare.com/infrared-led-board.htm