Atur jumlah dan catatan
Stok Total: Sisa 3
Subtotal
Rp900.000
Jotamastic 90 Red Std 049
Rp900.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Primer Cat Dasar
Thinner pengencer: Jotun Thinner No. 17 (10%)
This is a two component polyamine cured epoxy mastic coating. It is a surface tolerant, abrasion resistance, high solids, high build product. This product is tintable in a wide range of colours in Jotun's Multicolor Industry (MCI) system. Specially designed for areas where optimum surface preparation is not possible or desired. Provides long lasting protection in environments with high corrosivity. Can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel, aluminium, concrete and a range of aged coating surfaces. It can be applied at sub zero surface temperatures.
Typical use
General:
Primarily designed for maintenance and repair.
Marine:
Outside hulls, exterior and interior areas.
Protective:
Recommended for offshore environments, including splash zones, refineries, power plants, bridges, buildings, mining equipment and general structural steel.
Solids by volume ISO 3233 80 +- 2%
Gloss level (GU 60 °) ISO 2813 semi gloss (35-70)
Flash point ISO 3679 Method 1 35 °C
Density calculated 1.4 kg/l
VOC-US/Hong Kong US EPA method 24 (tested)
(CARB(SCM)2007, SCAQMD rule 1113, Hong Kong) 270 g/l
VOC-EU IED (2010/75/EU) (theoretical) 234 g/l
VOC-China GB/T 23985-2009 (ISO 11890-1) (tested) 246 g/l
VOC-Korea Korea Clean Air Conservation Act (tested) 273 g/l
Typical recommended specification range
STANDARD GRADE
Dry film thickness 100 - 300um
Wet film thickness 125 - 375um
Theoretical spreading rate 8 - 2.7 m2/l
This is a two component polyamine cured epoxy mastic coating. It is a surface tolerant, abrasion resistance, high solids, high build product. This product is tintable in a wide range of colours in Jotun's Multicolor Industry (MCI) system. Specially designed for areas where optimum surface preparation is not possible or desired. Provides long lasting protection in environments with high corrosivity. Can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel, aluminium, concrete and a range of aged coating surfaces. It can be applied at sub zero surface temperatures.
Typical use
General:
Primarily designed for maintenance and repair.
Marine:
Outside hulls, exterior and interior areas.
Protective:
Recommended for offshore environments, including splash zones, refineries, power plants, bridges, buildings, mining equipment and general structural steel.
Solids by volume ISO 3233 80 +- 2%
Gloss level (GU 60 °) ISO 2813 semi gloss (35-70)
Flash point ISO 3679 Method 1 35 °C
Density calculated 1.4 kg/l
VOC-US/Hong Kong US EPA method 24 (tested)
(CARB(SCM)2007, SCAQMD rule 1113, Hong Kong) 270 g/l
VOC-EU IED (2010/75/EU) (theoretical) 234 g/l
VOC-China GB/T 23985-2009 (ISO 11890-1) (tested) 246 g/l
VOC-Korea Korea Clean Air Conservation Act (tested) 273 g/l
Typical recommended specification range
STANDARD GRADE
Dry film thickness 100 - 300um
Wet film thickness 125 - 375um
Theoretical spreading rate 8 - 2.7 m2/l
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan