Atur jumlah dan catatan
Stok: Habis
Subtotal
-
INSTA360 DUAL / TRIPLE ELECTRIC SUCTION CUP CAR MOUNT for Insta 360 Action Camera Action Cam Garansi Resmi - Triple
Rp9.465.000
diskon 3%
Harga sebelum diskon Rp9.799.000
Pilih varian: Triple
INSTA360 DUAL / TRIPLE ELECTRIC SUCTION CUP CAR MOUNT for Insta 360 Action Camera Action Cam Garansi Resmi
Garansi RESMI 3 Bulan INSTA360 INDONESIA Denka
Garansi 14 hari Tukar Baru** (Hanya berlaku utk Kerusakan Pabrik/Factory Defect, Tdk meng-cover Krusakan krn Pemakaian)
Features:
• Film 360° Vehicle-Mounted Footage
• Three 4.5" (115mm) Suction Cups, Support Bars
• Built-In Sensor for Steady Suction
• 110 lb (50Kg) Vertical Load Capacity
• 1/4"-20 Screw, 3-Prong Mount
• 1000mAh Battery, 120-Hour Runtime
• Impact Resistant, Withstands Low Temps
• Materials: Carbon fiber, aluminum alloy, plastic, silicone
Included:
Triple Electric Suction Cup Car Mount
3x Electric Suction Cup Mount
3x Suction Cup Protective Cover
2x NATO Rail Mount
1x Horizontal Support Bar
1x Expansion Support Bar
1x 3-in-1 USB-C Charging Cord
1x Clamp Mount
1x 1/4" to Ball Head Adapter
1x Hex Wrench
1x Thumb Screw
1x 3-Prong to Ball Head Adapter
1x Ball Head Base
Dual Electric Suction Cup Car Mount
2x Electric Suction Cup Mount
2x Suction Cup Protective Cover
1x NATO Rail Mount
1x Expansion Support Bar
1x 3-in-1 USB-C Charging Cord
1x Clamp Mount
1x 1/4" to Ball Head Adapter
1x Hex Wrench
1x Thumb Screw
1x 3-Prong to Ball Head Adapter
1x Ball Head Base
Dual/Triple Electric Suction Cup Car Mount
Lock in. Hit the road. Get the shot.
New angles made easy.
Break free from traditional mounts and capture bold, dynamic third-person driving shots.
Locked in, every time.
Upgraded design that locks instantly with one press. Built-in sensors continuously monitor suction so your rig maintains maximum grip at all times. Long-lasting battery offers up to 120 hours* of power with up to 5 days of suction on a full charge—ideal for road trips.
Engineered for the extremes.
Made with high-strength materials and a durable 18mm carbon fiber support rod, it stays steady through rough roads, high speeds, and tough weather.
Fits any setup.
Easily mounts to a wide range of vehicle types and positions. Nail any angle from your roof, hood or trunk.
Flexible by design.
Switch between a triple, dual, or single cup setup. Mix and match to capture every angle your adventure demands.
Notes:
1. The Insta360 Triple/Dual Electric Suction Cup Car Mount is only compatible with the Insta360 Action Invisible Selfie Stick. Do not use with other selfie sticks.
2. When using the Triple Electric Suction Cup Car Mount, try to install all three suction cups on the same surface. If this is not possible, the suction cups on either side of the horizontal support rod must be on the same surface, and the suction cup on the expansion support rod must be installed on another suitable surface.
3. After installing the mount, ensure all the knobs are fully tightened. If a knob cannot be tightened, or if the NATO rail mount, expansion support rod, or selfie stick remain loose even after tightening, do not use the mount.
4. The suction cups are modular. When used individually, they do not support installing a selfie stick.
5. Do not drop, hit, or throw the mount to avoid damage.
6. Do not use the mount in the rain.
7. Do not expose the product to grease or chemical solvents for a long period, as this may weaken the suction.
8. Before installing the mount, ensure that the surface of the car or area is smooth and clean.
9. Before starting suction, press the mount fully against the surface and adjust the angle if needed.
10. Keep the white filter cotton at the bottom of the suction cup to prevent sand or dirt from entering.
11. When not charging, keep the USB-C port's silicone plug sealed to prevent water or dust from entering.
12. Clean the suction cup after use to maintain suction power.
13. When attached to a vehicle, check the battery level while the vehicle is parked. If the battery is below 10%, remove and charge fully before using it again. It is suggested to gently shake the suction cup every 6 hours to ensure it remains secure.
14. If the mount is not used for a long time (e.g., 3 months), recharge the battery.
15. Please assemble and use the mount according to the instructions and do not use it with any other accessories. If malfunction or damage is caused by failure to follow the instructions in this document, the warranty will be void.
-Iz
Garansi RESMI 3 Bulan INSTA360 INDONESIA Denka
Garansi 14 hari Tukar Baru** (Hanya berlaku utk Kerusakan Pabrik/Factory Defect, Tdk meng-cover Krusakan krn Pemakaian)
Features:
• Film 360° Vehicle-Mounted Footage
• Three 4.5" (115mm) Suction Cups, Support Bars
• Built-In Sensor for Steady Suction
• 110 lb (50Kg) Vertical Load Capacity
• 1/4"-20 Screw, 3-Prong Mount
• 1000mAh Battery, 120-Hour Runtime
• Impact Resistant, Withstands Low Temps
• Materials: Carbon fiber, aluminum alloy, plastic, silicone
Included:
Triple Electric Suction Cup Car Mount
3x Electric Suction Cup Mount
3x Suction Cup Protective Cover
2x NATO Rail Mount
1x Horizontal Support Bar
1x Expansion Support Bar
1x 3-in-1 USB-C Charging Cord
1x Clamp Mount
1x 1/4" to Ball Head Adapter
1x Hex Wrench
1x Thumb Screw
1x 3-Prong to Ball Head Adapter
1x Ball Head Base
Dual Electric Suction Cup Car Mount
2x Electric Suction Cup Mount
2x Suction Cup Protective Cover
1x NATO Rail Mount
1x Expansion Support Bar
1x 3-in-1 USB-C Charging Cord
1x Clamp Mount
1x 1/4" to Ball Head Adapter
1x Hex Wrench
1x Thumb Screw
1x 3-Prong to Ball Head Adapter
1x Ball Head Base
Dual/Triple Electric Suction Cup Car Mount
Lock in. Hit the road. Get the shot.
New angles made easy.
Break free from traditional mounts and capture bold, dynamic third-person driving shots.
Locked in, every time.
Upgraded design that locks instantly with one press. Built-in sensors continuously monitor suction so your rig maintains maximum grip at all times. Long-lasting battery offers up to 120 hours* of power with up to 5 days of suction on a full charge—ideal for road trips.
Engineered for the extremes.
Made with high-strength materials and a durable 18mm carbon fiber support rod, it stays steady through rough roads, high speeds, and tough weather.
Fits any setup.
Easily mounts to a wide range of vehicle types and positions. Nail any angle from your roof, hood or trunk.
Flexible by design.
Switch between a triple, dual, or single cup setup. Mix and match to capture every angle your adventure demands.
Notes:
1. The Insta360 Triple/Dual Electric Suction Cup Car Mount is only compatible with the Insta360 Action Invisible Selfie Stick. Do not use with other selfie sticks.
2. When using the Triple Electric Suction Cup Car Mount, try to install all three suction cups on the same surface. If this is not possible, the suction cups on either side of the horizontal support rod must be on the same surface, and the suction cup on the expansion support rod must be installed on another suitable surface.
3. After installing the mount, ensure all the knobs are fully tightened. If a knob cannot be tightened, or if the NATO rail mount, expansion support rod, or selfie stick remain loose even after tightening, do not use the mount.
4. The suction cups are modular. When used individually, they do not support installing a selfie stick.
5. Do not drop, hit, or throw the mount to avoid damage.
6. Do not use the mount in the rain.
7. Do not expose the product to grease or chemical solvents for a long period, as this may weaken the suction.
8. Before installing the mount, ensure that the surface of the car or area is smooth and clean.
9. Before starting suction, press the mount fully against the surface and adjust the angle if needed.
10. Keep the white filter cotton at the bottom of the suction cup to prevent sand or dirt from entering.
11. When not charging, keep the USB-C port's silicone plug sealed to prevent water or dust from entering.
12. Clean the suction cup after use to maintain suction power.
13. When attached to a vehicle, check the battery level while the vehicle is parked. If the battery is below 10%, remove and charge fully before using it again. It is suggested to gently shake the suction cup every 6 hours to ensure it remains secure.
14. If the mount is not used for a long time (e.g., 3 months), recharge the battery.
15. Please assemble and use the mount according to the instructions and do not use it with any other accessories. If malfunction or damage is caused by failure to follow the instructions in this document, the warranty will be void.
-Iz
Ada masalah dengan produk ini?
ULASAN PEMBELI

Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan