Explosion proof Heat Detector Thermotech Model 302-EPM-135

Thermotech Model 302-EPM Heat Detector
Explosion proof for installation in hazardous locations. Has hexagonal grip bushing with 1/2’ conduit threads for attachment to threaded hub cover of series JL fixture fitting as manufactured by Killark Electric Co., or equal. Must be hand tightened only. For Interior use.

General
The Thermotech heat detector Model 302 is a normally open device designed especially for fire detection and alarm systems. These rate compensation type detectors are available in either 135°F. or 194°F. ratings. All four basic models are self restoring, hermetically sealed, shock and corrosion resistant, and are tamper-proof. Refer to NFPA STANDARD 72, STANDARD FOR AUTOMATIC FIRE DETECTORS for application requirements, testing and maintenance. the Thermotech heat detectors are not directionally affected, they can be mounted horizontally or vertically.

Principal of Operation
The Model 302 operates on the principles of a rate compensation detector. The detector consists of a high expansion aluminum tube which encases two insulation struts with opposing open contact points.

The high expansion sensing shell and the expansion struts have a different coefficient of expansion. A slow rate of temperature rise allows the heat to penetrate the inner expansion struts. Therefore, the tubular shell and the struts expand slowly until the total device has been heated to its rated temperature level of 135°F./194°F. At this point, the silver contact points close which initiates the alarm. When subjected to a rapid rate temperature rise there is not as much time for heat to penetrate the inner strut. The rapid lengthening of the shell allows the struts to come together at a lower level which compensates for thermal lag inherent in conventional fixed temperature detectors. When the surrounding air temperature goes below the rated temperature level, the shell contracts which forces contacts to open, thus automatically resetting the detector.