GST JTG-ZW-G1B Conventional UV Flame Detector c/w. Base DZ-03

Detect fire by detecting ultraviolet light produced by burning substances, which is suitable for places where open flames are prone to occur when a fire occurs. The sensor uses a high-performance ultraviolet photosensitive tube, which has a sensitive, reliable and short response time in alarming. It is manufactured by surface (SMT) mounting technology; built-in Single-chip computer, solidified high-reliability fire judgment program, reducing false alarms; non-coding type.

JTG-ZW-G1B point type UV flame detector detects fire by detecting ultraviolet light produced by burning materials. It is suitable for places where open flames are prone to occur when a fire occurs. It is suitable for places where there is strong flame radiation or no smoldering stage when a fire occurs. This detector can be used in fires and places that require quick response to flames, and can be widely used in factories, warehouses and other places. Used in conjunction with other detectors, fires can be detected in a timely manner and losses can be minimized. This detector mainly has the following features:

(1) Built-in microcontroller and intelligent algorithm, which can not only achieve rapid alarm but also reduce the false alarm rate;
(2) Secondary sensitivity setting, suitable for places with different interference levels;
(3) It adopts relay type output mode (normally open, closed when alarming), which can directly control other equipment;
(4) The sensing component adopts technologically advanced ultraviolet photosensitive tubes, which have the advantages of high sensitivity, reliable performance, strong resistance to dust pollution, moisture resistance and corrosion resistance

Working voltage : DC16V～DC28V
Working current :
Monitoring current: ≤2.5mA
Alarm current: ≤15mA
Output contact : 1A/DC24V
Detection angle : ≤120
Protection area : S=(h×tgα)²π, h: detector height from the ground, α=40°
Usage environment :
Temperature: -10℃～+55℃
Relative humidity: ≤95%, no condensation