Honeywell/Notifier HPF-PS10E External Power Supply

General
The HPF-PS Series is a remote power supply line from Honeywell
and is a direct replacement for the PSE and FCPS Series. The
HPF-PS6(B)(E) is a 6 amp and the HPF-PS10(B)(E) is a 10 amp,
remote power supply with battery charger that may be connected to
any 12 or 24 volt fire alarm control panel (FACP) or used as a stand-
alone power supply. The HPF-PS Series provides 24 VDC power for
NACs (notification appliance circuits) configured as either Class B or
Class A (requires the ZNAC-PS option card) with multiple sync pro-
tocol options. The HPF-PS Series also provides auxiliary power,
constant or resettable, suited for detectors, annunciators, door hold-
ers, and other fire alarm system peripherals. The HPF-PS Series
cabinet can hold two 7 AH or 18 AH batteries and can charge up to
33 AH batteries in a separate cabinet. The HPF-PS6E and
HPF-PS10E are models rated for 240V operation.
Features
• Up to five (6 amp model) or seven (10 amp model) independently-
configurable, power-limited output circuits for:
– Class B and/or Class A NACs
– Class B and/or Class A resettable or non-resettable 24V auxil-
iary power
– door holder power
• Converts from Class B to Class A wiring without losing any out-
puts using the ZNAC-PS converter card (sold separately)
• Optimal for powering four-wire smoke detectors, annunciators,
and other system peripherals requiring regulated power
• Configurable for ANSI Temporal 3 or Temporal 4 coded output
• UL-Listed NAC synchronization using System Sensor, Whee-
lock, Gentex, or AMSECO appliances
• Synchronization can be triggered from FACP NAC/remote sync
outputs, cascaded power supply, or a control module, single or
multi, which may be housed within the power supply cabinet
• Ability to cascade up to four power supplies
• Two (6 amp model) or three (10 amp model) fully-isolated input/
control circuits which can be programmed to any output
• Two Form C normally-closed trouble relays for AC Trouble and