Kentec Sigma A-XT Extinguishant Control Panel

Features
DS72.05.2014
Sigma A-XT Extinguishant Control Panel
UL864 and FM listed
Three initiation circuits as standard
Any single zone or any combinations
of zones can be configured to release
Configurable first stage NAC delays
Configurable detection delays
Zero time delay upon manual release
option
Compatible with I.S. barriers
Non-latching zone input option to
receive signals from other systems
such as aspirating equipment
Configurable releasing delays up to 60
seconds in 5 second steps
Configurable releasing duration up to 5
minutes in 5 second steps
Countdown timer shows time
remaining until release
Supports up to seven, four wire status
indicators
Built in Extract Fan control

Technical
Construction
IP Rating
Finish
Colour - lid & box
Mains supply
Mains supply fuse
Power supply rating
Maximum ripple current
Battery type (Yuasa NP)
Battery charge voltage
Battery charge current
Battery fuse
Maximum current draw from batteries
Quiescent current of panel in mains fail
R0V output
Sounder outputs
Fault relay contact rating
Fire relay contact rating
Local fire relay contact rating
First stage contact rating
Second stage contact rating
Extract contact rating
Zone quiescent current
Terminal capacity
Number of detectors per zone
NAC rating
Detection circuit end of line
Monitored input end of line
Sounder circuit end of line
Extinguishant output EOL
No. of initiating circuits
No. of NAC circuits
Extinguishant release output
Extinguishant release delay
Extinguishant release duration
SIL, AL, FLT, RST inputs
Zone normal threshold
Detector alarm threshold
Call point alarm threshold
Short circuit threshold
Monitored inputs normal threshold
Monitored inputs alarm threshold
Monitored inputs Short circuit threshold
Status unit/Ancillary board connection
Status unit power output
1.2mm mild sheet steel
IP30
Epoxy powder coated
Red RAL 3002 (optional grey BS 00 A 05 semi-matt)
230V AC or 115V AC