Atur jumlah dan catatan
Stok Total: Sisa 3
Subtotal
Rp22.500.000
Notifier RP-2002E Releasing Control Panel c/w. Backup Battery
Rp22.500.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: FIRE SUPPRESSION
The RP-2002 is a six-zone FACP for single and dual hazard agent releasing applications. The RP-2002 provides reliable fire detection, signaling and protection for commercial, industrial and institutional buildings requiring agent-based releasing. The RP-2002 is compatible with System Sensor’s i3 detectors which are conventional smoke detectors that can transmit a maintenance trouble signal to the FACP indicating the need for cleaning and a supervisory ‘freeze’ signal when the ambient temperature falls below the detector rating of approximately 45°F (7.22°C). In addition, the control panel is compatible with conventional input devices such as two-wire smoke detectors, four-wire smoke detectors, pull stations, waterflow devices, tamper switches and other normally-open contact devices. Refer to the Notifier Device Compatibility Document for a complete listing of compatible devices.
Features :
Listed to UL Standard 864, 9th edition.
FM Approved.
Designed for agent releasing standards NFPA 12, 12A, 12B, and 2001.
Meets International Building Code (IBC) seismic requirements.
Disable/Enable control per input zone and output zone.
Extensive transient protection.
Dual hazard operation.
Adjustable pre-discharge, discharge and waterflow delay
timers.
Cross-zone (double-interlock) capability.
Six programmable Style B (Class B) IDCs (Initiating Device
Circuit).
System Sensor i3 series detector compatible.
Four programmable Style Y (Class B) output circuits - (special application power).
Strobe synchronization:
– System Sensor
– Wheelock
– Gentex
– Faraday
– Amseco
Three programmable Form-C relays.
7.0 amps total 24 VDC output current.
Resettable and non-resettable output power.
Built-in Programmer.
ANN-BUS connector for communication with optional devices (up to 8 total of any of the following):
– N-ANN-80 Remote LCD Annunciator
– N-ANN-I/O LED Driver
– N-ANN-S/PG Printer Module
– N-ANN-RLY Relay Module
– N-ANN-LED Annunciator Module
80-character LCD display (backlit).
Features :
Listed to UL Standard 864, 9th edition.
FM Approved.
Designed for agent releasing standards NFPA 12, 12A, 12B, and 2001.
Meets International Building Code (IBC) seismic requirements.
Disable/Enable control per input zone and output zone.
Extensive transient protection.
Dual hazard operation.
Adjustable pre-discharge, discharge and waterflow delay
timers.
Cross-zone (double-interlock) capability.
Six programmable Style B (Class B) IDCs (Initiating Device
Circuit).
System Sensor i3 series detector compatible.
Four programmable Style Y (Class B) output circuits - (special application power).
Strobe synchronization:
– System Sensor
– Wheelock
– Gentex
– Faraday
– Amseco
Three programmable Form-C relays.
7.0 amps total 24 VDC output current.
Resettable and non-resettable output power.
Built-in Programmer.
ANN-BUS connector for communication with optional devices (up to 8 total of any of the following):
– N-ANN-80 Remote LCD Annunciator
– N-ANN-I/O LED Driver
– N-ANN-S/PG Printer Module
– N-ANN-RLY Relay Module
– N-ANN-LED Annunciator Module
80-character LCD display (backlit).
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan