FPM10A Fingerprint Module Modul Sidik Jari Arduino

Modul sensor sidik jari cocok untuk aplikasi mikrokontroler Arduino / PIC atau Raspberry Pi dengan antar muka komunikasi data melalui serial (RX-TX).

Library: github: Adafruit-Fingerprint-Sensor-Library
Library Arduino coba gunakan Adafruit-Fingerprint-Sensor-Library. Itu seharusnya bisa untuk Arduino maupun ESP8266.
Datasheet kayaknya bisa pakai punya R305 fingerprint sensor.
Saya belum coba jadi TIDAK ADA JAMINAN

Item Description:


Supply voltage: DC 3.6 ~ 6.0V / 3.3V Supplying
Supply Current: Current: 120mA
Peak current: 140mA
Fingerprint image time: 1 .0 seconds
Window size: 14 18 mm
Matching mode: Match mode (1:1)
Search mode (1: N)
Signature File: 256 bytes
Template files: 512 bytes
Safety level: five (from low to high: 1,2,3,4,5)
False Accept Rate (FAR): 0 .001% (security level 3)
False Reject Rate (FRR): 1 .0% (security level 3)
PC Interface: UART (TTL logic level) or USB2.0 / USB1.1
Communication baud rate (UART): (9600 x N) bps where N = 1 ~ 12 (default value N = 6, ie 57600bps)
Working environment:
Temperature: -20 - +50
Relative Humidity: 40% RH-85% RH (non-condensing)
Storage environment:
Temperature: -40 - +85
Relative humidity: 85 % H (non-condensing)
Dimensions (L x W x H):
Split: Fingerprint sensor: 56 x 20 x 21.5mm
-One: 56 x 20 x 21.5mm

Hardware connection:


Module via a serial communication interface, directly with 3.3V or 5V power microcontroller communication: Module data transmission feet (2
Foot TD) connected to the data bit machine receiving end (RXD), data receiver module feet (3 feet RD) connected to the data sender bit machine (TXD).
For the RS-232 level (for example: PC machine) for PC communication, increase the level conversion between the module and the host computer
Circuitry (e.g.: MAX232 circuit)