JHEMCU GF16 flying tower is a 2-4S F405 flying tower, with 5 serial ports (UART1, UART2, UART3, UART4, UART6), 8 motor ports, one I2C port, and one SBUS interface (the serial port used by SBUS is RX1). Leave the WS2812 interface. Built-in black box 16MB and barometer, buzzer interface, camera interface. Flight control parameters: CPU: STM32F405 Gyroscope/Accelerometer: MPU6000 OSD: AT7456E Barometer: BMP280 Black box: 16MB IIC: Support BEC: 5V/3A Number of motor channels: 8 M1-M8 UART: UART1 (RC), UART2, UART3, UART4, UART6 USB: micro usb Size: 16*16MM M3 Receiver: ELRS (CRSF), TBS (CRSF), SBUS, IBUS, DS M2, DS MX Support programmable LED such as WS2812 Support buzzer Built-in voltage and current sensors ESC parameters: 1. Input voltage: 2-4S LiPo/2-4S HV LiPo 2. BEC output: none 3. Continuous working current of a single ESC: 13A*4 4. External ESC size: 24*25mm (including the maximum size of pads and protruding points) 5. Screw hole pitch 16*16MM, aperture 3MM 6. Firmware: BLHELI_S G_H_30_16_7.HEX 7. Support Dshot600, Dshot300, Dshot150, Oneshot125, Multishot, PWM control signals Weight: flight control + ESC = 5.8 grams Packing list: GF16-F405 flight control *1 GF16-ESC Four-in-one ESC *1 M2*20 screw *4 M2*5 shock absorbing ball *8 M2 nut *4 18AWG wire *2 220UF/25V capacitor *1 XT30 *1 Tambahan Bubble Wrap:
https://www.tokopedia.com/justshopit/tambahan-bubble-wrap-khusus-ready-stock-tidak-dijual-terpisah