Matek FLIGHT CONTROLLER F411-WTE for FPV Drone Fixed Wing INAV 2-6S FC

Product Description For Matek F411-WTE FLIGHT CONTROLLER F411 for WTE OSD 2~6S For INAV Barometer For Racing Drone For FLYWING Airplane FC Specifications MCU: 100MHz STM32F411CEU6 IMU: BMI270 (SPI) Baro: SPL06-001 (I2C) OSD: AT7456E (SPI) Blackbox: No 2x Uarts 2x Full Softserial 6x PWM outputs (2x Motors, 4x Servos) 1x I2C 4x ADC (For VBAT, Current, RSSI, AirSpeed) 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red) Built in inverter on For UART2-RX for SBUS input Switchable Dual Camera Inputs Vbat power ON/OFF switchable for VTX and camera PPM receiver: not supported Power 6~30V DC IN (2~6S LiPo) 132A Current Sense (Scale 250) PDB/Current sense resistor: 90A continuous, 132A burst. BEC 5V 1.5A for FC amp; Peripherals BEC Vx 5A for servos 5V 6V option Vbat for VTX and camera (ON/OFF switchable) LDO 3.3V 200mA Battery Voltage Sensor: 1k:10k FC Firmware For INAV Target: For MATEKF411TE ( For INAV4.1 or newer) Physical Dimensions: 31 x 26 x 16.5 mm Mounting: 22 x 22mm, 2mm Weight: 10g Including 1x FC F411-WTE Dupont 2.54 pins (Board is shipped unsoldered)