Peavey VSX26E VSX48E DSP-based Loudspeaker Management System DLMS VSX-26E VSX-48E - VSX-26E

Harga Untuk 1 Unit
VSX-26E
The VSX 26e processors is a DSP-based, loudspeaker management system that boast a 96 kHz sample rate and a floating point DSP processor for quiet accurate filter response. The crossover filters are fully adjustable and any input can be routed to any output. The VSX Editor Software for PC allows complete remote setup and operation via the front panel USB port or by the rear panel Ethernet network connection. Files can also be saved and loaded using this interface software.

Features VSX 26e

Balanced Inputs: 2 x XLR

Balanced Outputs: 6 x XLR

EQ filter types include: PEQ, Low-Shelf, Hi-Shelf, Low-Pass, High-Pass, All-Pass1 and All-Pass2

Crossover/Band-pass filters feature Butterworth, Bessel or Linkwitz-Riley alignments from 1st order (6 dB/Oct) to 8th order (48 dB/Oct)

Signal generator (sine, white noise, pink noise)

Channels can be linked for simplified stereo operation

Every output features: 9-band PEQ, gain, compressor/limiter, polarity, Delay (680 ms), mute, and crossover/band-pass filters

5-segment LED meters with limit indication on each output

5-segment LED meters on each input

Maximum input and output level +20 dBu, XLR balanced inputs and outputs

Every input features Gain, Mute, HP and LP filters, 8-band PEQ, polarity and Delay (680 ms)

Security lock

Dynamic range input to output greater than 109 dB (A-weighted) or 107 dB (unweighted)

24-bit Delta-Sigma A/D and D/A converters

Ethernet & USB B port for setup and control

96 kHz Sample rate

PC Editor Software allow complete remote setup and operation via USB or Ethernet
Channels (Input)
2

Channels (Output)
6

DSP On-Board
Yes

Network Control
Yes

Frequency Response
10 Hz 21 kHz; +0 / -0.5 dB

Front Panel Control
Yes

Mute Groups
Yes

Input Connectors
2 x XLR

Output Connectors
6 x XLR

Color
Black

Rack Mount (19")
Yes (1U)

Net Weight
5.3 lbs (2.39 kg)

Product Height
1.75" (45 mm)

Product Width
19.00" (483 mm)


VSX-48E
The Peavey VSX 48e processors are DSP-based, loudspeaker management systems that boast a 96kHz sample rate and a floating point DSP processor for quiet accurate filter response. The crossover filters are fully adjustable and any input can be routed to any output. The VSX Editor Program for PC allows complete remote setup and operation via the front panel USB port or by the rear panel Ethernet network connection. Files can also be saved and loaded using this interface software.

Peavey VSX 48e Features:
Balanced Inputs: VSX 48e 4
4 XLR balanced inputs and 8 XLR balanced outputs VSXe48
Maximum input and output level +20 dBu, XLR balanced inputs and outputs
Frequency response 20 Hz to 20 kHz +0, -1 dB
5 segment LED meters with limit indication on each output
Every input features Gain, Mute, HP and LP filters, 8 bands of PEQ, polarity and Delay (680 mS)
Security lock
Dynamic range input to output greater than 109 dB (A-weighted) or 107 dB (unweighted)
USB B port for setup and control
24 bit Delta-Sigma A/D and D/A converters
Every output features: 9 bands of PEQ, gain, compressor/limiter, polarity, Delay (680 mS), mute, and crossover/band-pass filters
Ethernet port for setup and control
Channels can be linked for simplified stereo operation
96 kHz Sample rate
Signal generator (sine, white noise, pink noise)
PC Editor Programs allow complete remote setup and operation via USB or Ethernet
Crossover/Band-pass filters feature Butterworth, Bessel or Linkwitz-Riley alignments from 1st order (6 dB/Oct) to 8th order (48dB/Oct)
Balanced Outputs: VSX 48e 8
EQ filter types include: PEQ, Low-Shelf, Hi-Shelf, Low-Pass, High-Pass, All-Pass 1 and All-Pass 2
5 segment LED meters on each input
THD+N < 0.01% at 1 kHz
Weight Unpacked: 5.80 lb (2.63 kg)
Weight Packed: 7.72 lb (3.5 kg)
Packed Dimensions (WxHxD): 11.69" x 21.14" x 4.9" (29.6926 x 53.6956 x 12.446 cm)