Kabel Las Full Tembaga, tahan panas dan oli. Merk antara : Nexans, Titarc atau Top Cable Tidak bisa pilih merk karna menyesuaikan stok. Thanks.
TYPE: HO1N2 D WELDING Heat and Oil Resistant ,Flame retardant . COLOR: BLACK Application: 100/100 V max 1. CORE: ( 1 ) SPECIAL flexible class D , Requirements: CENELEC HD 383IEC60228 or equiv as DIN VDE 0250 Annealed copper conductor with separator tape 2. INSULATION: (10 mm 2 to 185 mm 2 ) Special cross-linked synthetic rubber /(Type EM5 ) With Special heavy duty and oil resisting and flame retardant external layer test method HD505 OR equiv in VDE DIN 0472 Color black 5. MARKING: printed ‘’ USE < HAR > H01N2 D 1 x size ( in mm²) 213
Operating temperature maximum +85°C short circuit: +250°C+ Minimum Temperature recommended for transport, Handling, etc.. : –20°C Current ratings: see table guide to use CENELEC HD516 or equivalent national standards Duty cycle: the duty cycle is defined as the time for which the current flows expressed as e percentage of the complete cycle, which is taken as 5 minutes. Since the length of time of which current flows during the welding operation varies from occasional of continuous, the duty cycle can very from as little as 20% to a maximum of 100% on automatic operation. As conductor temperature varies according to time in use as well as current, the following ratings are given as a guide: Automatic welding up to 100% Semi-automatic welding : 30-85% Manual welding: 30-60% Very intermittent or occasional welding: up to 20% Ambient temperatures : Cable operating temperature also varies according to the prevailing ambient temperature. Welding cables are designed to give optimum performance up to an operating temperature of 85°C at an ambient temperature of 25°C . The reduction factors for increased ambient temperature are: Ambient temperature 30°C 35°C 40°C 45°C Reduction factor 0.96 0.91 0.87 0.82