5.0/ 5.0
100% pembeli merasa puas
4 rating • 1 ulasan
5(4)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok: Habis
Subtotal
-
APM Power Module XT60 Kit
Rp250.000
The APM 2.5 Power Module is a simple way of providing your APM and Pix32 with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6-pos cable. The on-board switching regulator outputs 5.3V and a maximum of 2.5A from up to a 10S LiPo battery. The Power Module comes completely assembled with XT60 connectors, and wrapped in shrink tubing for protection.
The Power Module is only designed to power APM,Pix32, a RC receiver and APM accessories (GPS, radio). It is not designed to power servos. Use your aircraft's own ESC/BEC for that.
Package Includes:
- Molex 6 Position Connector 15 cm
- APM Power Module with XT60 Connectors Board
Specifications:
- Max input voltage: 42V
- Max current sensing: 90A -
- Voltage and current measurement configured for 5V ADC
- Switching regulator outputs 5.3V and 2.5A max
- 6-pos Molex cable plugs directly to APM/Pix32's 'PM' connector
The Power Module is only designed to power APM,Pix32, a RC receiver and APM accessories (GPS, radio). It is not designed to power servos. Use your aircraft's own ESC/BEC for that.
Package Includes:
- Molex 6 Position Connector 15 cm
- APM Power Module with XT60 Connectors Board
Specifications:
- Max input voltage: 42V
- Max current sensing: 90A -
- Voltage and current measurement configured for 5V ADC
- Switching regulator outputs 5.3V and 2.5A max
- 6-pos Molex cable plugs directly to APM/Pix32's 'PM' connector
Ada masalah dengan produk ini?