Michell EASIDEW EA2-TX-100-HD Transmitter

Tipe (new type) : EA2-TX-100 (tanpa HD)

Two-wire power loop connection

Dew point units or ppm moisture content units

IP66 (NEMA 4)

Excellent sensor protection

Range -100 ~ +20°C

Operating temperature -40 ~ 60°C

quick response


Technical indicators

performance
Dew point range -100 ~ +20°C dew point
Dew point accuracy ±2°C dew point
Response time T95 is 5 minutes (dry to wet)
Repeatability 0.5°C dew point
input Output
output signal 4-20 mA (two-wire) active output, full scale customizable
dew point -100 ~ + 20°C
-148 ~ +68°F
0-3000 ppm V
ppm V output or non-standard output range must be specified when ordering Bright
voltage 12–28V DC
Resistive load 250 Ω @ 12 V maximum
500 Ω @ 24 V
current consumption 20mA max
Power Fluctuation Effects ±0.005% RH/V
Working conditions
Operating temperature -40 ~ +60°C
Working humidity 0–100% RH
work pressure up to 45 MPa (450 barg)
flow 1 to 5 Nl/min, installed in standard sampling sleeve;
0 to 10m/sec, direct insertion
Temperature Coefficient Temperature compensation has been made within the operating temperature range
Mechanical behavior
Sealing protection class IP66 corresponding standard BS EN 60529:1992,
and NEMA 4 corresponding standard NEMA 250-2003
shell material Stainless steel
size L=132mm x ø27mm
Mounting Thread 5/8" - 18 UNF
weight 150g
filter HDPE protective cap
80μm stainless steel protective cap (optional)
Electrical connections see table
interchangeability Sensors are interchangeable