5.0/ 5.0
100% pembeli merasa puas
6 rating • 1 ulasan
5(6)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 11
Subtotal
Rp225.000
Cytron 10Amp 5V-30V DC Motor Driver 10A MD10C
Rp225.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: 18 - MOTOR DRIVER
SKU: KM4027 / MD10C
Features
Bi-directional control for one Brushed DC motor (Single Channel).
Support motor voltage ranges from 5V to 30VDC.
No Reverse Polarity Protection at Vmotor, please double check the polarity before power up.
Regenerative Braking.
Maximum current up to 13A continuous and 30A peak (10 seconds).
3.3V and 5V logic level input, compatible with Arduino and Raspberry Pi.
Solid state components provide faster response time and eliminate the wear and tear of mechanical relay.
Fully NMOS H-Bridge for better efficiency and no heat sink is required.
Speed control PWM frequency up to 20KHz (output frequency is same as input frequency).
Support both Locked-Antiphase and Sign-Magnitude PWM operation. **Note that it is not "RC PWM"
The new MD10C can be powered from a single power source and NO additonal Vin is required.
Dimension: 75mm x 43mm
Packing List
1 x MD10C Rev3.0
1 x 2510 PCB connector - 3 ways female
3 x 2510 terminal pin
4 x plastic spacer(~ 7mm)
WIKI: https://github.com/CytronTechnologies/CytronMotorDriver
Features
Bi-directional control for one Brushed DC motor (Single Channel).
Support motor voltage ranges from 5V to 30VDC.
No Reverse Polarity Protection at Vmotor, please double check the polarity before power up.
Regenerative Braking.
Maximum current up to 13A continuous and 30A peak (10 seconds).
3.3V and 5V logic level input, compatible with Arduino and Raspberry Pi.
Solid state components provide faster response time and eliminate the wear and tear of mechanical relay.
Fully NMOS H-Bridge for better efficiency and no heat sink is required.
Speed control PWM frequency up to 20KHz (output frequency is same as input frequency).
Support both Locked-Antiphase and Sign-Magnitude PWM operation. **Note that it is not "RC PWM"
The new MD10C can be powered from a single power source and NO additonal Vin is required.
Dimension: 75mm x 43mm
Packing List
1 x MD10C Rev3.0
1 x 2510 PCB connector - 3 ways female
3 x 2510 terminal pin
4 x plastic spacer(~ 7mm)
WIKI: https://github.com/CytronTechnologies/CytronMotorDriver
Ada masalah dengan produk ini?