Arducam 16MP Pi MIPI Camera 4K IMX298 for Raspberry Pi

𝐍𝐎𝐓𝐄: 𝐓𝐈𝐃𝐀𝐊 𝐌𝐄𝐍𝐄𝐑𝐈𝐌𝐀 𝐊𝐋𝐀𝐈𝐌 𝐀𝐓𝐀𝐔 𝐊𝐎𝐌𝐏𝐋𝐀𝐈𝐍 𝐃𝐈 𝐋𝐔𝐀𝐑 𝐒𝐈𝐒𝐓𝐄𝐌 𝐓𝐎𝐊𝐎𝐏𝐄𝐃𝐈𝐀

SKU: KE3007
Code: B0174

Note:
Please note that it is the RAW sensor which doesn’t include ISP (Image Signal Processing) on the image sensor chip, so it only supports manual exposure, manual white balance, manual gain settings.

Features:
Support all Raspberry Pi Models: Same interface, all-model support. Directly plugged into Raspberry Pi’s native high-speed MIPI CSI-2 port. Support Raspberry Pi 4, Pi 3/3B+/3A+, CM3/3+, Pi Zero and more. NOTE: Raspberry Pi motherboard is not included in the package
Higher Resolution than V2 cameras: 1/2.8” 16MP Sony IMX298 Pi camera module to break Raspberry Pi camera’s 8MP ceiling with double resolution and larger sensor
Frame Rates: Capture video at 4672x3496/7fps, 1080p/55fps and 720p/120fps resolutions
Applications: Better for Raspberry Pi camera applications where higher resolutions are needed for capturing clearer images, such as advanced driver assistance (ADAS) and multimedia applications of virtual reality (VR) and augmented reality (AR)
Disclaimer: Arducam MIPI cameras are for advanced users with a certain degree of development background. The RPI camera driver is not V4L2 compliance, and it can’t work with native Raspberry Pi camera drivers, commands, and software. You have to use Arducam SDK and examples


SPEC
Optical format: 1/2.8−inch
Effective focus lens : 4.04mm
F.No :2.0±5%
Active pixels: 4656 H × 3496 V
Pixel size: 1.12um x 1.12um
Color filter array: RGBW Bayer pattern
ADC resolution: 10−bit, on−chip
Output Interface: 2-Lane / 4-Lane MIPI
Frame Rate: 16MP full resolution at 30fps
FOV 60 degrees
Support all series Raspberry pi boards


Package Including:
1pcs Arducam MIPI IMX298 16MP Color Camera Module
1pcs 150mm 15pin 1.0mm to 22pin 0.5mm pitch FPC cable
1pcs 80mm 22pin 0.5mm pitch FPC cable

Wiki - https://www.arducam.com/docs/cameras-for-raspberry-pi/mipi-camera-modules/imx298-16mp-color-ro