Beetle ESP32 C6 Mini Development Board for Wireless Smart Wearable Device (Supports BLE, Battery Charging)

SKU: KM3038/DFR1117

INTRODUCTION
Beetle ESP32-C6 is a mini size Arduino low-power IoT development board based on the ESP32-C6 chip, featuring a compact design with dimensions as small as a coin (25*20.5mm). The ESP32-C6 is equipped with a high-performance 160MHz RISC-V 32-bit processor, supporting communication protocols such as Wi-Fi 6, Bluetooth 5, Zigbee 3.0, and Thread 1.3. It is capable of connecting to various IoT networks using multiple communication protocols, making it ideal for use as a Matter terminal device. The development board integrates lithium battery charging management, allowing for battery charging without the need for external modules. This feature contributes to a more compact project size, making it highly suitable for wearable applications.

FEATURES
Ultra-compact size, measuring only 25*20.5mm.
Equipped with the ESP32-C6 chip, it supports communication protocols including Wi-Fi, BLE, Zigbee, and Thread.
Supports Wi-Fi 6 protocol for lower latency and lower power consumption.
Ultra-low power consumption with deep sleep at 14uA.
Integrated lithium battery charging functionality.
Supports battery voltage detection, providing insights into device power levels.

APPLICATIONS
Electronic Badge
Backpack Charm
Pet Tracker
Electronic Watch
Smart Button
Smart Lighting
Human-Interactive Device

SPECIFICATION
Basic Parameters

Operating Voltage: 3.3V
Type-C Input Voltage: 5V DC
VIN Input Voltage: 5V DC
Max Charging Current: 0.5A
Sleep current: 14uA (in deep sleep mode, powered by battery)
Operating Temperature: -10~60℃
Dimension: 25x20.5mm/0.98x0.81”


Hardware Information

Processor: RISC-V single-core processor
Main Frequency: 160 MHz
SRAM: 512KB
ROM: 320KB
Flash: 4MB
RTC SRAM: 16KB
USB: USB 2.0 CDC


WIFI

WIFI Protocol: IEEE 802.11b/g/n
IEEE 802.11ax (20 MHz-only non-AP mode)
Bandwidth: Support 20 MHz and 40 MHz at 2.4 GHz band
WIFI Mode: Station, SoftAP, SoftAP+Station combined mode
WIFI Frequency: 2.4GHz
Frame Aggregation: TX/RX A-MPDU, TX/RX A-MSDU


Bluetooth

Bluetooth Protocol: Bluetooth 5, Bluetooth mesh
Bluetooth Frequency: 125 Kbps, 500 Kbps, 1 Mbps, 2 Mbps


IEEE 802.15.4

Compatible with IEEE 802.15.4-2015 protocol
Frequency band: 2.4GHz
Data rate: 250Kbps
Supports Thread 1.3 and Zigbee 3.0


Ports

Digital I/O x13
LED PWM 6 Channel
SPI x1
UART x3 (LP UART x1)
I2C x2 (LP I2C x1)
I2S x1
IR Transceiver: transmit channel x5, receive channel x5
1 × 12-bit SAR ADC, 7 Channel
DMA Controller: transmit channel x3, receive channel x3

SHIPPING LIST
Beetle ESP32 C6 Mini Development Board x1
10pin-2.54mm Pin Header x2

Wiki: https://wiki.dfrobot.com/SKU_DFR1117_Beetle_ESP32_C6