4.9/ 5.0
100% pembeli merasa puas
7 rating • 3 ulasan
5(6)85.71%
4(1)14.29%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: Sisa 6
Subtotal
Rp395.000
CYTRON 10Amp 5V-30V DC Motor Driver 2 Channels 10A MDD10A
Rp395.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: 18 - MOTOR DRIVER
SKU: KM4028/MDD10A
Features
Bi-directional control for two brushed DC motors.
Support motor voltage ranges from 5V to 30VDC (Rev2.0).
No Reverse Polarity Protection at Vmotor, please double check the polarity before power up.
Maximum current up to 10A continuous and 30A peak (10 seconds) for each channel.
Support 3.3V and 5V logic level input (for PWM and DIR), compatible with Arduino and Raspberry Pi.
Solid-state components provide faster response time and eliminate the wear and tear of mechanical relay.
Fully NMOS H-Bridge for better efficiency and no heat sink is required.
Regenerative Braking.
Speed control PWM frequency up to 20KHz (output frequancy is same and input frequancy).
Support both Locked-Antiphase and Sign-Magnitude PWM operation. ** Note this is not "RC PWM"
2 activation buttons for manual activation or fast test on each channel.
Dimension: 84.5mm x 62mm
Packing List
1 x MDD10A Rev2.0
1 x 2510 PCB connector - 5 ways female
5 x 2510 terminal pin
WIKI - https://github.com/CytronTechnologies/CytronMotorDriver
Features
Bi-directional control for two brushed DC motors.
Support motor voltage ranges from 5V to 30VDC (Rev2.0).
No Reverse Polarity Protection at Vmotor, please double check the polarity before power up.
Maximum current up to 10A continuous and 30A peak (10 seconds) for each channel.
Support 3.3V and 5V logic level input (for PWM and DIR), compatible with Arduino and Raspberry Pi.
Solid-state components provide faster response time and eliminate the wear and tear of mechanical relay.
Fully NMOS H-Bridge for better efficiency and no heat sink is required.
Regenerative Braking.
Speed control PWM frequency up to 20KHz (output frequancy is same and input frequancy).
Support both Locked-Antiphase and Sign-Magnitude PWM operation. ** Note this is not "RC PWM"
2 activation buttons for manual activation or fast test on each channel.
Dimension: 84.5mm x 62mm
Packing List
1 x MDD10A Rev2.0
1 x 2510 PCB connector - 5 ways female
5 x 2510 terminal pin
WIKI - https://github.com/CytronTechnologies/CytronMotorDriver
Ada masalah dengan produk ini?