DWIN 4.3" Inch Smart Display TTL UART DMG48270C043_03W HMI Touchscreen UART LCD For Arduino - Resistive

𝐍𝐎𝐓𝐄: 𝐓𝐈𝐃𝐀𝐊 𝐌𝐄𝐍𝐄𝐑𝐈𝐌𝐀 𝐊𝐋𝐀𝐈𝐌 𝐀𝐓𝐀𝐔 𝐊𝐎𝐌𝐏𝐋𝐀𝐈𝐍 𝐃𝐈 𝐋𝐔𝐀𝐑 𝐒𝐈𝐒𝐓𝐄𝐌 𝐓𝐎𝐊𝐎𝐏𝐄𝐃𝐈𝐀


SKU:

4.3 inch smart UART Screen DMG48270C043_03W

Features:
● Based on self-designed T5L ASIC,16.7M Colors, 24bit,480*272 pixel, TN TFT LCD;
● No touch screen/Resistive touch screen/Capacitive touch screen ;
● TTL/CMOS; 10Pin_1.0mm socket for power supply and serial communication;
● Multiple download mode: via SD card or on-line serial port;
● Dual Development System: DGUS II/ TA(Instruction set);
● TN View Angle: 70°/70°/50°/70°(L/R/U/D);
● With GUI & OS dual-core, GUI with rich controls. DWIN OS kernel is open to the user for the second-development, via DWIN OS language or KEIL C51.
● Flash: 16 MBytes NOR Flash, for fonts, pictures and audio files. Rewrite cycle: over 100,000 times
● Operating Voltage 4.5~5.5V, typical value of 5V

Display Data:
LCD Type TN, TFT LCD
Viewing Angle Normal viewing angle, 70°/70°/50°/70°（L/R/U/D）
Resolution 480×272 pixels (support 0°/90°/180°/270°)
Color 24-bit 8R8G8B
Active Area (A.A.) 95.00mm (W)×53.90mm (H)

Touch Parameters (WTR)
Type RTP (Resistive touch panel)
Structure ITO film + ITO glass
Touch Mode Support point touch and drag
Surface Hardness 3H
Light Transmittance Over 80%
Life Over 1,000,000 times touch

Touch Parameters (WTC)
Type CTP (Capacitive touch panel)
Structure G+G structure with surface cover of tempered glass
Touch Mode Support point touch and drag
Surface Hardness 6H
Light Transmittance Over 90%
Life Over 1,000,000 times touch

Packing List:
● 1x 4.3'' HMI LCD Display
● 1x Board FPC Converter To DIP
● 1x Cable FPC 10P 1.0mm

Tools: https://ecdn6.globalso.com/upload/p/1355/source/2024-09/DGUS_V7647-0821.zip

Video Tutorial: https://www.dwin-global.com/t5l-dgus-v7-6-video-tutorial/

Datasheet: https://ecdn6.globalso.com/upload/p/1355/source/2024-11/Datasheet-DMG48270C043_03W2.zip