ONDULINE | BITULINE PRİMA PP300 | 10 m x 1 m / roll (10 sqm)

BITULINE PRİMA PP300 is a Torch-applied bituminous felt reinforced with non-woven polyester mat and modified with APP plastomeric bitumen. BITULINE Prima PP300 has cold flexibility property of -5°C. Produced in thickness of 3 mm BITULINE Prima PP300 is commercialized bottom and upper surfaces protected by thermo-fusible PE film. Where to use and Properties •BITULINE is torch apply membrane designed for new roofing and reroofing applications, can be bonded by heat welding over damp or concrete belowgrade vertical and horizontal foundation structures and below concrete slabs, on floor surfaces or sloped or flat roofs prepared with BITULINE primer prior to the application of the waterproofing membrane. 2 mm ,3 mm, 4 mm and 5 mm thick, the BITULINE membranes are produced in rolls of 10 m x 1 m. •BITULINE base sheets are produced with upper and bottom surfaces with thermo fusible PE film and used for BURs; flat roof terraces under ballasts gravel, paving slabs, roof gardens or ground level tanking and waterproofings of internal or external underground walls and public works and civil engineering projects. •For effective waterproofing watertightness alone is not enough. The waterproofing felt must possess a number of additional qualities; adhesion and mechanical resistance in order to resist to the effects of thermal expansion/retraction, heavy traffic or other loading imposed damaging effects of all likely contaminants, etc. and resistance to the damaging effects of biological, chemical and physical agents. The waterproofing felt should also resist to aging degradation of the structure in order to maintain the water-tightness of the entire building. BITULINE membranes have optimal mechanical and physical properties and their quality is ultimate in performance, versatility, and ease-of-use. Packaging: - Rolls/pallet : 30 rolls - Qty/pallet : 300 m² - Weigth/pallet : ±1120 kg