Flipper Zero BUNDLE (WIFI DEVBOARD AND SILICONE CASE) - READY STOCK

Flipper Zero Multi-tool Device for GeeksFlipper Zero is a portable multi-tool for pentesters and geeks in a toy-like body. It loves hacking digital stuff, such as radio protocols, access control systems, hardware, and more. It's fully open-source and customizable, so you can extend it in whatever way you like.
What's in the box:
Flipper Zero
USB-C to USB-A cable
Quickstart guide
Sticker
microSD card is required to use the device. A microSD card is not included.

The developer board with Wi-Fi connectivity made specially for Flipper Zero. Based on the ESP32-S2 module, this devboard allows:
Wireless Flipper Zero firmware update
Advanced in-circuit debugging via USB or Wi-Fi using the Black Magic Probe open source project
As a bonus, ESP32-S2 allows Wi-Fi penetration testing (PMKID capturing, deauth, and more) and connects Flipper Zero to the Internet. These functions are not supplied with the module and must be implemented additionally.

Protective Silicone Case for your Flipper Zero.
Protect your Flipper Zero without losing access to ports. The sign "ФЛИППЕР" means "Flipper" in Cyrillic. Soft and smooth, this silicone case will make your cyber companion even stronger, preserving an astonishing look.

Tech specs
MCU (Microcontroller unit)
Model: STM32WB55RG
Application processor: ARM Cortex-M4 32-bit 64 MHz
Radio processor: ARM Cortex-M0+ 32-bit 32 MHz
Radio: Bluetooth LE 5.4, 802.15.4 and proprietary
Flash: 1024 KB (shared between application and radio)
SRAM: 256 KB (shared between application and radio)

Display
LCD Monochrome
Resolution: 128x64 px
Controller: ST7567
Interface: SPI
Diagonal Size: 1.4“

Sub-1 GHz module
Transceiver: CC1101
TX Power: -20 dBm max
Frequency bands (depends on your region):
● 315 MHz
● 433 MHz
● 868 MHz
● 915 MHz

Buzzer
Frequency: 100-2500 Hz
Sound Output: 87 dB
Type: Coin

Vibration Motor
Force value: 30 N
Speed: 13500 rpm

Battery
LiPo 2100 mAh
Up to 28 days battery life

Micro SD
Up to 256 GB microSD card (SPI mode)
2-32 GB card recommended
Read/Write speed: up to 5 Mbps
Supported file systems: FAT12, FAT16, FAT32, and exFAT

Body
Size: 100x40x25 mm (3.95x1.58x1.01 inches)
Weight: 102 grams (3.6 ounces)
Materials: PC, ABS, PMMA
Operating temperature: 0° to 40° C (32° to 104° F)

GPIO
13 I/O pins available to user on external 2.54 mm connectors
3.3V CMOS Level
Input 5V tolerant (See AN4899)
Up to 20 mA per digital pin

Bluetooth LE 5.4
TX power: 4 dBm max
RX sensitivity: -96 dBm
Data rate: 2 Mbps

Infrared
RX wavelength: 950 nm (+/-100nm)
RX carrier: 38 KHz (+/-5%)
TX wavelength: 940 nm
TX carrier: 0-2 MHz
TX power: 300 mW
Supported protocols:
● NEC family
● Kaseikyo
● RCA
● RC5, RC6
● Samsung
● SIRC

NFC
Transceiver: ST25R3916
Frequency: 13.56 MHz
Supported cards:
● ISO-14443A/B
● NXP MIFARE Classic, Ultralight, DESFire, etc.
● FeliCa
● HID iClass (PicoPass)
● NFC Forum protocols

RFID 125 kHz
Frequency: 125 kHz
Modulation: AM/OOK
Coding: AKS, PSK
Supported cards:
● EM400x, EM410x, EM420x
● HID
● Indala
● FDX (A & B)
● Pyramid
● AWID
● Viking
● Jablotron
● Paradox
● PACStanley
● Keri
● Gallagher
● Nexwatch

Control
5-button directional pad
Back button

USB
Type-C, USB 2.0 (12 Mbps)
USB device
Charging (1A max)

iButton 1-Wire
Supported protocols:
● Dallas DS199x, DS1971
● CYFRAL
● Metakom
● TM2004
● RW1990