KR03021 Arduino MEGA328 w/ Driver Motor

Arduino MEGA328 w/ Driver Motor, The Arduino 328 is a microcontroller board based on the ATMEGA 168 Arduino MEGA328 w/ Driver Motor Item No. : KR03021 Arduino Atmega328 microcontroller with DC motor driver Digital I/O pins: 14 (of which 6 provide PWM output) Flash memory 32 KB Operating voltage: 5V The Nexus Robot Arduino 328 Microcontroller is a microcontroller board based on the Arduino 168. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 8 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller, simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. 1. Descriptions : The Arduino 328 is a microcontroller board based on the Arduino 168. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 8 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. 2. Specifications: Microcontroller: ATmega168 Operating Voltage: 5VInput Voltage (recommended): 7-12V Input Voltage (limits): 6-20V Digital I/O Pins: 14 (of which 6 provide PWM output) Analog Input Pins: 8 DC Current per I/O Pin: 40 mA DC Current for 3.3V Pin: 50 mA Flash Memory 32 KB of which 2KB used by bootloader SRAM: 1KB(ATmega168) or 2KB(ATmega328) EEPROM:512bytes(ATmega168) or 1KB(ATmega328) Clock Speed: 16 MHz 3. Compatible with: Arduino Duemilanove Prototype Shield Arduino I/O Shield Arduino LCD Shield Arduino Motor Shield Arduino Ethernet Shield 4. Schematic dapat didownload di website klinikrobot