ER11 5mm Shaft Spindle Motor Adapter Extension Spring Collet Chuck

ER11 5mm Shaft Spindle Motor Adapter Extension Spring Collet Chuck Router CNC PCB End Mill Milling Cutter

Specification:

ER11A 5mm Extension Rod

Bahan: Baja kualitas khusus, kekerasan tinggi

Shaft Hole: 8 mm (+0.02 mm) kebutuhan untuk menginstal ekspansi pemanasan

ER11A Nut: Diluar heksagonal berdiameter maksimum 19 mm secara keseluruhan.


Application : Those collets are widely applied to drilling, boring, milling, tapping, carving and CNC router lathes, etc.

The correct method of mounting the collet nut:

1. Put the chuck into the pressure cap, gently turn the clamp spring, when eccentric portion of the pressure cap recessed clamp spring groove. Along the arrow direction and use equal force to push clamp spring, can mount pressure cap.

2. Put the clamp spring and cap all together installed on the chuck body or spindle. Insert into the clamping hole after wipe the cylindrical shank, use a wrench to tighten the pressure cap, until clip firmly the tool before use .

(Note: Avoid fastening pressure cap that not installed tool, to avoid damage the clamp spring)

3. Use a wrench to loosen the pressure cap and took out the chuck or tool, remove the tool. Along the direction of the arrow push out the clamp spring. Then according to need replace other clamp spring.



Package included

1x ER11A 5mm Extension Rod