5.0/ 5.0
100% pembeli merasa puas
3 rating • 1 ulasan
5(3)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 99
Subtotal
Rp2.023.530
SKF LGMT 2/5 (Industrial and Automotive Wheel) Grease/Gemuk Bearing
Rp2.023.530
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Lubrication dan Grease
SKF LGMT 2 is mineral oil based, lithium soap thickened grease with excellent thermal stability within its operating temperature range. This premium quality, general purpose grease is suitable for a wide range of industrial and automotive applications.
Excellent oxidation stability
Good mechanical stability
Excellent water resistance and rust inhibiting properties
Typical applications:
Agricultural equipment
Automotive wheel bearings
Conveyors
Small electric motors
Industrial fans
Technical data :
Designation : LGMT 2/ (pack size)
DIN 51825 code : K2K-30
NLGI consistency class : 2
Thickener : Lithium
Colour : Red brown
Base oil type : Mineral
Operating temperature range : 30 to +120 C (20 to +250 F)
Dropping point DIN ISO 2176 : >180 C (>355 F)
Base oil viscosity
40 C, mm/s : 110
100 C, mm/s : 11
Penetration DIN ISO 2137:
60 strokes, 10 mm : 265295
100 000 strokes, 10 mm : +50 max. (325 max.)
Mechanical stability
Roll stability, 50 hrs at 80 C, 10 mm : +50 max.
V2F test : M
Corrosion protection
Emcor: standard ISO 11007 : 00
water washout test : 00
salt water test (100% seawater) : 01*
Water resistance :
DIN 51 807/1, 3 hrs at 90 C : 1 max.
Oil separation :
DIN 51 817, 7 days at 40 C, static, % : 16
Lubrication ability :
R2F, running test B at 120 C : Pass
Copper corrosion :
DIN 51 811 : 2 max. at 110 C (230 F)
* Typical value
Excellent oxidation stability
Good mechanical stability
Excellent water resistance and rust inhibiting properties
Typical applications:
Agricultural equipment
Automotive wheel bearings
Conveyors
Small electric motors
Industrial fans
Technical data :
Designation : LGMT 2/ (pack size)
DIN 51825 code : K2K-30
NLGI consistency class : 2
Thickener : Lithium
Colour : Red brown
Base oil type : Mineral
Operating temperature range : 30 to +120 C (20 to +250 F)
Dropping point DIN ISO 2176 : >180 C (>355 F)
Base oil viscosity
40 C, mm/s : 110
100 C, mm/s : 11
Penetration DIN ISO 2137:
60 strokes, 10 mm : 265295
100 000 strokes, 10 mm : +50 max. (325 max.)
Mechanical stability
Roll stability, 50 hrs at 80 C, 10 mm : +50 max.
V2F test : M
Corrosion protection
Emcor: standard ISO 11007 : 00
water washout test : 00
salt water test (100% seawater) : 01*
Water resistance :
DIN 51 807/1, 3 hrs at 90 C : 1 max.
Oil separation :
DIN 51 817, 7 days at 40 C, static, % : 16
Lubrication ability :
R2F, running test B at 120 C : Pass
Copper corrosion :
DIN 51 811 : 2 max. at 110 C (230 F)
* Typical value
Ada masalah dengan produk ini?