Unistrut P1001T Back-to-Back, Slotted Channel - P1001T-10HG

Unistrut P1001T Back-to-Back, Slotted Channel INTRODUCTION Unistrut channels and fittings offer total flexibility in design and construction of assemblies for framing applications. Unistrut products are available in a range of materials and finishes. These finishes offer differing degrees of corrosion protection for use in a variety of environments. Where required, factory decorative finishes, , are available to order. MATERIALS Channels are cold rolled from 1.5mm and 2.5mm steel strip and are available in: PG : PRE - GALVANIZED HG : HOT DIP GALVANIZED SS : STAINLESS STEEL MARINE GRADE Pre Galvanised (PG) Our most popular finish, generally used for internal applications. Pre Galvanized to Z275- BS EN 10346 1.0244 standards. Supplied with a zinc coating to a nominal coat of 20μm. Zinc Plated (ZP) An alternative to a Pre Galvanized product and generally used for internal applications. Again often used in sterile environments. Electroplated EN 12329. Hot Dipped Galvanised (HG) Processed in accordance with BS EN ISO 1461:2009. It is an excellent solution for outdoor environments and has a unique metallurgical structure which gives outstanding resistance to mechanical damage in transport, erection and service. Stainless Steel (SS) Stainless steel to 1.4404 (316L) standards. Excellent for marine applications, highly corrosive and extreme environmental conditions. Pickle amp; Passivate is available upon request - Please state when ordering LENGTH Standard channel lengths are 3m or 6m. Cut channel lengths can be supplied. Certificate : COC Contact WA : 081225943434