RC Simulation Flash Light 12 LED Lighting Kit Steering Brake for 1/10 Scale Models RC Car Yokomo Tamiya HSP HPI AXIAL RC4WD TRX

Brand Name : QYWWRC
Material : Composite Material
Origin : Mainland China
Use : Vehicles & Remote Control Toys
Quantity : 1 pcs
Wheelbase : Upper Shell
RC Parts & Accs : Connectors/Wiring
For Vehicle Type : Cars
Tool Supplies : Battery
Technical parameters : KV1100
Four-wheel Drive Attributes : Assemblage
Upgrade Parts/Accessories : Car Shell
Remote Control Peripherals/Devices : Servos
Recommend Age : 12+y,14+y


This 12 LED Lighting System Kit is suitable for 1/10 RC cars. It have four colors lights, include white headlights, blue taillights, red brake lights and yellow turn lights. With improved circuit board, it can support High-V receiver and normal receiver. And one set of lights can be controlled by the transmitter.

Features:

12 LED lights
Simulation car light
Simple and easy to use
Far flashing, super bright
Improved design of circuit board, HOSI power saving
Headlight white, blue taillight, brake light red, turn light yellow
Suitable for 1/10 RC cars

Specifications:

Name: 12 LED Lighting System Kit

Material: Plastic

LED bulb quantity: 12

Working Current: 100mA

Input voltage: 4.8V - 6.0V

Lights color: White, red, yellow, blue

Connection method: CH1 - Servo

CH2 - Speed controller

CH3 - Receiver

Suitable for: 1/10 RC cars

LED cable length: about 300mm

Circuit board size: 55*35*15.8mm

Weight: 60g

Lights Description:

Headlights:

4 white LED lights

Connect the lighting system to the CH3 on receiver: the transmitter can independently control a group of lights, another group of lights are on when the car speed up; Not connect to the CH3 on receiver: one group of lights are always on, another group of lights are on when the car speed up.

Turn lights:

4 yellow LED lights

With the remote control change the direction, the lights will synchronous flashing.

Taillights:2 blue LED lights, 2 red LED lights

The blue lights are always on. When the car speed up or brake, blue lights will go out. Only when brake, the red lights on.

Installation Method:

CH2 Transmitter:

Connect the plug of servo and ESC to the CH1 and CH2 on lighting system, and then connect the CH1 and CH2 to receiver.

CH3 Transmitter:

Connect the plug of servo and ESC to the CH1 and CH2 on lighting system, and then connect the CH1, CH2 and CH3 to receiver.

D1:

Front -Left Turning Light

D2:

Front Light

D3:

Forward Indicator

D4:

Forward Indicator

D5:

Front Light

D6:

Front-Right Turning Light

D7:

Rear -Left Turning Light

D8:

Taillight

D9:

Backward Brake Indicator

D10:

Backward Brake Indicator

D11:

Taillight

D12:

Rear Right Turning Light

Package List:

1 * 12 LED Lighting System Kit