ATF Lubricity Test Rig (BOCLE)

Simple to use interface – digital computer control of all instrument functions
Standard ASTM D5001 test sequence pre-loaded into ABT microprocessor controller – operator fits cleaned specimens, adds fuel sample & presses the ‘Start Test’ button
Automatic control of test sequence - no operator-included variability in test results
Automatic flow controllers for moist and dry air - no operator input required to control the humidity and flow rate of the conditioned air
PC-based data logging of motor speed, test duration, fuel temperature, air temperature, humidity recorded during the test & a summary printed out confirming that all parameters were within the specified limits
Interchangeable humidity & temperature probes - humidity and temperature measurement does not need to be re-calibrated, simply replace the combined relative humidity and temperature probe with an exchange pre-calibrated unit
Heating & Cooling System through Peltier Heating & Cooling System
Digital Microscope with Image Acquisition System & software
PC-based data acquisition & analysis system of motor speed, test duration, fuel temperature, air temperature, humidity

HUB. 081246390570



Basic Test Rig with PC based Controller
Humidity Control System
PC Based Data Acquisition Software for RPM Motor and Fuel Temperature
Digital Microscope, 100x with Image Acquisition System and Software
Test Balls (25)
Test Rings (25)
Tool kit

Fluid Volume - 50 ± 1.0 mL
Fluid Temperature - 25 ± 1 C
Fluid Ambient Temperature - + 5.0 to +35.0 C
Conditioned Air - 10 ± 0.2% relative humidity at 25±1 C
Flow rate through Fluid 0.5l/min
Flow rate over the fluid 3.3l/min
Fluid Conditioning Time - 15 min
Fluid Test Conditions - 3.8 L/min flowing over the fluid
Applied Load - 1000 g (500g weight) (±1g)
Cylinder Rotational Speed - 240 ± 0.5 rpm
Test Duration - 30 ± 0.1 min
Data Acquisition & Analyze - Motor speed, Fuel temperature, air temperature , humidity & test duration.
Test Ring - Dia 49.25 to 49.10, Thk 13.11 to 13 (SAE 8720 Steel, Hardness 58 to 62 Rc, surface finish Rq 0.51 to 0.71 micron).
Test Ball - 12.7mm (0.5 inch) (AISI 52100 Steel, Hardness 64 to 66 Rc)

HARGA 2.200.000.000 ( DUA MILYAR DUA RATUS JUTA RUPIAH )