Blueretro Ps2 Wireless Controller Bluetooth Adapter Receiver

Barang diproses langsung dari luar negeri Estimasi kedatangan di Jakarta 3 minggu s/d 1 bulan Harga sudah All in (Biaya dll) Tinggal menambahkan ongkir di Tokopedia saja Before delivery, we will flash the Bluetooth firmware to the corresponding game console according to the cable package you purchased. If you want to use other consoles, you can update your Bluetooth adapter firmware here Note: Some PS2 console motherboards may have problems, the PS2 console may not power when plugged into a Bluetooth adapter. In this case, insert the data cable delivered with the Bluetooth adapter into the USB hole of the PS2 console to obtain power. feature 1) The receiver and the patch cord can be replaced separately, suitable for different consoles. PS1 PS2 SS DC N64 GEN/MD NES SNES/SFC NGC WII. . . . 2) Support firmware can be updated. 3) Almost zero lag, PS4 amp; PS5 controllers use Blueretro with less than 6ms lag. 5) Support keyboard/trackball/mouse console accessories. 6) The key value of the button can be configured through the web Bluetooth port of Google Chrome. 4) Support PS3 / PS4 / PS5 / Xbox One S / Xbox Series X|S / Wii U Pro / Switch Pro / wireless controllers, etc. Power LED: Indicates that the BlueRetro Core is powered properly. Status LED: Solid: An error occured, try power cycle, check serial logs for detail. Pulsing: Bluetooth inquiry mode enable (new pairing). Off: No error and Bluetooth inquiry mode disabled. BOOT Button: Short press (outside BT inquiry mode): Disconnect all Bluetooth devices from the adapter. Short press (BT inquiry mode): Cancel Bluetooth inquiry mode (new pairing). 3 sec hold: Enable Bluetooth inquiry mode (new pairing). 10 sec hold: Factory reset BlueRetro to default configuration and clear BT pairing keys. EN Button: Reboot BlueRetro Core. Micro USB Port: Connect a micro USB cable for firmware update. DB25 Female Port: Connect BlueRetro Cables.