Matek MATEKSYS F405 WING V2 STM32F405RGT6 Flight Controller Built-in

Material : Composite Material Brand Name : GEMFAN Origin : Mainland China Recommend Age : 14+y Use : Vehicles amp; Remote Control Toys FC Specifications MCU: STM32F405RGT6, 168MHz , 1MB Flash IMU: ICM42688-P Baro: DPS310 OSD: AT7456E Blackbox: MicroSD card slot 6x UARTs, 1x Softserial_Tx option(INAV) 10x PWM outputs 2x I2C 3x ADC (VBAT, Current, RSSI) Built in inverter for SBUS input USB Type-C(USB2.0) FC Firmware ArduPilot: MatekF405-Wing (ArduPlane 4.4 or newer) INAV: MATEKF405SE (INAV 6.0 or newer) PDB Input voltage range: 9~30V (3~6S LiPo) w/TVS protection Current Senor: 220A, 3.3V ADC (INAV scale 150, ArduPilot 66.7A/V) Sense resistor: 100A continuous, 220A peak Battery Voltage divider 1K:10K (Scale 1100 in INAV, BATT_VOLT_MULT 11.0 in ArduPilot) BEC 5V output Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed Continuous current: 2 Amps BEC 9V /12V output Designed for Video Transmitter, Camera, Gimbal ect. Continuous current: 2 Amps 12V option with Jumper pad for stable 9V/12V output, input voltage should gt; output voltage +1V BEC Vxoutput Designed forServos Voltage adjustable, 5V Default, 6V or 7.2V options Continuous current: 5 Amps, 6A Peak for stable Vx output, input voltage should gt; Vx voltage +1V BEC 3.3Voutput Designed for external 3.3V peripherals Linear Regulator Continuous current: 200mA Physical Mounting: 30.5 x 30.5mm, 4mm with Grommets3mm Dimensions: 54 x 36 x 13 mm Weight: 25g Including 1x F405-Wing-V2 1x 20cm JST-GH-4P to JST-GH-4P cable for I2C port Dupont 2.54 pins(Board is shipped unsoldered) INAV Tips: