Atur jumlah dan catatan
Stok Total: Sisa 10
Subtotal
Rp315.000
Alat ESP-12F AC/DC Power Supply ESP8266 AC90-250V/DC7-12V/USB5V WIFI
Rp315.000
- Kondisi: Baru
- Waktu Preorder: 15 Hari
- Min. Pemesanan: 1 Buah
- Etalase: Elektronik
ESP-12F AC/DC Power Supply ESP8266 AC90-250V/DC7-12V/USB5V WIFI Single Relay Module Development Board
Semua Produk Di Toko Kami PO (Personal Pre-Order) 7-10 Hari Tergantung Stok Dan Posisi Gudang. Harap Chat Terlebih Dahulu Sebelum Order Atau Anda Setuju Dengan Waktu Pre-Order Yang Kami Tetapkan Secara Default 15-Hari.
Feature:1. On-board mature and stable ESP-12F WIFI module, large capacity 4M Byte Flash2. The I / O port and UART program download port of the WiFi module are all exported, which is convenient for secondary development.3. On-board AC-DC switching power supply module, power supply mode supports AC90-250V / DC7-12V / USB5V4. On-board WIFI module RST reset button5. ESP-12F supports the use of development tools such as Eclipse / Arduino IDE, and provides reference programs under the Arduino development environment.6. One 5V relay on board, output switching signal, suitable for controlling load with working voltage within AC250V / DC30V7. Onboard power indicator, 1 programmable LED and relay indicatorFunction:1. L, N: AC90-250V power supply2. AC90-250V to DC5V switching power supply (Do not touch here directly with your hand when using AC power supply !!!)3. VCC, GND: DC7-12V power supply;4. Micro USB: DC5V USB power supply;Note: AC90-250V, DC7-12V, DC5VUSB can be selected as one of the three power supply methods.5. 6X6mm button: ESP8266 reset button;6. UART program download port: GND, RX, TX, 5V of ESP8266 are connected to GND, TX, RX, 5V of the external TTL serial module respectively. IO0 must be connected to GND when downloading, and then disconnected connection;7. GPIO pin out port;8. Relay output:Normally closed end, the relay is short-circuited to COM before pull-in, and suspended after pull-in;COM: public end;NO: Normally open, the relay is suspended before the pull-in,
ID - 1619454
Semua Produk Di Toko Kami PO (Personal Pre-Order) 7-10 Hari Tergantung Stok Dan Posisi Gudang. Harap Chat Terlebih Dahulu Sebelum Order Atau Anda Setuju Dengan Waktu Pre-Order Yang Kami Tetapkan Secara Default 15-Hari.
Feature:1. On-board mature and stable ESP-12F WIFI module, large capacity 4M Byte Flash2. The I / O port and UART program download port of the WiFi module are all exported, which is convenient for secondary development.3. On-board AC-DC switching power supply module, power supply mode supports AC90-250V / DC7-12V / USB5V4. On-board WIFI module RST reset button5. ESP-12F supports the use of development tools such as Eclipse / Arduino IDE, and provides reference programs under the Arduino development environment.6. One 5V relay on board, output switching signal, suitable for controlling load with working voltage within AC250V / DC30V7. Onboard power indicator, 1 programmable LED and relay indicatorFunction:1. L, N: AC90-250V power supply2. AC90-250V to DC5V switching power supply (Do not touch here directly with your hand when using AC power supply !!!)3. VCC, GND: DC7-12V power supply;4. Micro USB: DC5V USB power supply;Note: AC90-250V, DC7-12V, DC5VUSB can be selected as one of the three power supply methods.5. 6X6mm button: ESP8266 reset button;6. UART program download port: GND, RX, TX, 5V of ESP8266 are connected to GND, TX, RX, 5V of the external TTL serial module respectively. IO0 must be connected to GND when downloading, and then disconnected connection;7. GPIO pin out port;8. Relay output:Normally closed end, the relay is short-circuited to COM before pull-in, and suspended after pull-in;COM: public end;NO: Normally open, the relay is suspended before the pull-in,
ID - 1619454
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan