professional grade 210 mm long handle scissors (right-handed or

Model Number : MT-Long Handle Scissors Feature : Long Length Finishing : sanding Material : 4Cr13MoV Alloy Steel Pruner Type : ANVIL Pruning Tool Type : Long Handlle Scissors Brand Name : TianBonsai Origin : Mainland China Certification : NONE Professional Grade (there is a stamp mark in the handle as above picture) Professional Grade tools, material is 4Cr13MoV Alloy Steel, handmade by professional technicians from TianBonsai. The 4Cr13MoV Steel, it slightly inferior to 5Cr15MoV Steel, but it also the good material for the bonsai tool, contains Molybdenom, Vanadium, 0.4 Chromium, after quenching treatment, it #39;s hardness is over HRC55, high intensity, strong tenacity and wear-resistant. How to use bonsai scissors When using scissors, apply a slight vertical force to the two handles in the opposite direction.For get the nice cutting function, we made a gap at between of both blades. so that this scissors could made a cleanly cut, also, the blades gap could protecting the blades. Test the tightness of rivets When the scissors handles closed, the tip of blades is stick by each other, when the handles open, you could feeling a little bit loose, because of the gad between on the blades. it #39;s normal state. Precautions for the use of bonsai tools: 1. Our tools have very sharp blades. Please pay attention to the safety of users and nearby personnel when using it. Do not arbitrarily place tools on high places. If the tool is accidentally dropped, it may cause injury to personnel and tools. 2. Choose a bonsai tool of the right size. When pruning, the diameter of the branches should not exceed the cutting limit specified by the cutter, otherwise the cutter will be easily damaged. 3. Don #39;t use bonsai tools to trim dry branches, otherwise it is easy to damage the tool blades. 4. The fine sand particles in the flower mud will damage the blade of the tool, so