5.0/ 5.0
100% pembeli merasa puas
5 rating • 3 ulasan
5(5)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 80
Subtotal
Rp16.000
Obeng Torx T7 Holes Secure Lubang Security Hole
Rp16.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Obeng Plus Torx Triwing Pentalobe MInus Triangle
Obeng Torx T7 Holes Secure Lubang Security Hole
Harga per 1 Pcs
Material: Steel
Color: Yellow
Whole Length: 10cm
Bar Length: 46mm
Bar Diameter: 3mm
Handle Length: 54mm
Handle Diameter: 10mm
[Conversion: 1cm=0.3937 inch, 1inch=2.54 cm]
Hardness: HRC 42° ~ 45°
Screw Standard: TORX
-----------------------------------------------------------------------------------------------------------------------------------------------
A Torx T6 screwdriver is a tool used to drive Torx screws that have a six-pointed star-shaped recess in the head. To secure a Torx T6 screw, you will need to use a screwdriver with a properly sized and fitting tip to prevent slipping and damaging the screw head.
Here are some steps you can follow to secure a Torx T6 screw:
Make sure you have the correct Torx T6 screwdriver. The tip of the screwdriver should fit snugly into the recess of the screw head.
Insert the screwdriver into the recess of the screw head and apply downward pressure.
Turn the screwdriver clockwise to tighten the screw. Make sure the screwdriver is securely in place and not slipping, as this can damage the screw head.
Continue turning the screwdriver until the screw is tight and secure.
Once the screw is tightened, remove the screwdriver from the screw head.
By following these steps, you can securely tighten a Torx T6 screw without damaging the screw head or the surrounding material.
Harga per 1 Pcs
Material: Steel
Color: Yellow
Whole Length: 10cm
Bar Length: 46mm
Bar Diameter: 3mm
Handle Length: 54mm
Handle Diameter: 10mm
[Conversion: 1cm=0.3937 inch, 1inch=2.54 cm]
Hardness: HRC 42° ~ 45°
Screw Standard: TORX
-----------------------------------------------------------------------------------------------------------------------------------------------
A Torx T6 screwdriver is a tool used to drive Torx screws that have a six-pointed star-shaped recess in the head. To secure a Torx T6 screw, you will need to use a screwdriver with a properly sized and fitting tip to prevent slipping and damaging the screw head.
Here are some steps you can follow to secure a Torx T6 screw:
Make sure you have the correct Torx T6 screwdriver. The tip of the screwdriver should fit snugly into the recess of the screw head.
Insert the screwdriver into the recess of the screw head and apply downward pressure.
Turn the screwdriver clockwise to tighten the screw. Make sure the screwdriver is securely in place and not slipping, as this can damage the screw head.
Continue turning the screwdriver until the screw is tight and secure.
Once the screw is tightened, remove the screwdriver from the screw head.
By following these steps, you can securely tighten a Torx T6 screw without damaging the screw head or the surrounding material.
Ada masalah dengan produk ini?