Thebest 12V 140 Amp Dual Battery Smart Isolator Isolation Relay ATV

Thebest 12V 140 Amp Dual Battery Smart Isolator Isolation Relay ATV_x000D_ _x000D_ Tersedia di toko Lucklot_x000D_ _x000D_ Specification:Name TMN isolating relay (BSR = Battery Sensitive Relay)Continuous load max. 140 ampsHousing color transparentStatus light / color yes / greenStatus light ON Voltage above 13.3 VDC (circuit is closed)Status light OFF voltage below 12.8V DC (circuit is open)Voltage 12VDimensions (LxWxH) approx 67x67x53mmConnections 2x battery screw connections + 1x ground lineAreas of applicationCar,buses,Boats,,Caravan and Camping,Solar applications,CarHifi,Etc. Purpose of use:1.If a second or (secondary) additional battery is to be installed in a vehicle, the installation of an isolating relay is absolutely recommended.2.The purpose of installing this relay is to ensure that the connection between the two batteries is disconnected with the engine switched off if the voltage falls below 12.8V. This ensures that the starter battery is not discharged if the additional battery consumes further energy.3.When the engine is switched on, the charging voltage increases to over 13.3V (alternator control voltage ≥ 13.4), as a result of which the cut-off relay closes the circuit and the starter and auxiliary batteries are charged at the same time. The same applies if the charging voltage of the additional battery increases to over 13.3V due to a connected charger or a built-in solar system. This BSR isolating relay works bidirectionally in both directions.4.This relay is suitable for CAN bus vehicles. No alternator control voltage d + or ignition plus is required. Package Included:1 X_x000D_ _x000D_