Atur jumlah dan catatan
Stok Total: 80
Subtotal
Rp437.000
TERRR DIYmalls 5PCS SD Card Module Mini TF Card Reader Writer Sensor +
Rp437.000
- Kondisi: Baru
- Waktu Preorder: 30 Hari
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
TERRR ==> Brand Name : DIYmalls
Model Number : FZ0829*5+FZ0036
Material : Polymer
Origin : Mainland China
is_customized : Yes
DIYmalls 5pcs SD Card Module Mini TF Card Reader Sensor with SPI Interface Onboard Level Conversion +1pc 40P Male to Female Dupont Cable for Arduino Mega2560 Nano ESP8266 ESP32 Wemos D1 Mini
The module (MicroSD Card Adapter) is a Micro SD card reader module for reading and writing through the file system and the SPI interface driver.
Pin diagram:
CS(chip select) / SCK(serial clock) / MOSI(SPI Bus Master Output/Slave Input) / MISO((SPI Bus Master Input/Slave Output) / VCC(Power supply 4.5V-5.5V) / GND(ground)
6Pin male header is pre-soldered.
You can plug female/male dupont cable directly with breadboard or other development board which has female header onboard.
Dimension: 4.2cmX2.4cm(1.65inX0.94in)
Interface level: 5V or 3.3V
Power supply: 4.5V to 5.5V, onboard 3.3V regulator circuit
Currency: 0.2-200mA
Communication interface: SPI
Positioning holes:
4 M2 screws positioning holes with a diameter of 2.2mm, so the module is easy to install positioning, to achieve inter-module combination.
Micro SD card connector:
This SD card module has a self-elastic card holder, which allows you to easily insert the card for easy operation.
3.3V regulator circuit:
LDO regulator output 3.3V for level conversion chip, Micro SD card supply.
Level conversion circuit:
Micro SD card to signal the direction of converts 3.3V, MicroSD card interface to control the direction of the MISO signal is also converted to 3.3V, general AVR microcontroller systems can read the signal.
Connection diagram display 1
Connection diagram display 2
How to use
If you use Arduino 2560, you need correct the CS pin number in the code. (chipselect=53)
The brands and models mentioned above are only used to show the suitability of the products.
Model Number : FZ0829*5+FZ0036
Material : Polymer
Origin : Mainland China
is_customized : Yes
DIYmalls 5pcs SD Card Module Mini TF Card Reader Sensor with SPI Interface Onboard Level Conversion +1pc 40P Male to Female Dupont Cable for Arduino Mega2560 Nano ESP8266 ESP32 Wemos D1 Mini
The module (MicroSD Card Adapter) is a Micro SD card reader module for reading and writing through the file system and the SPI interface driver.
Pin diagram:
CS(chip select) / SCK(serial clock) / MOSI(SPI Bus Master Output/Slave Input) / MISO((SPI Bus Master Input/Slave Output) / VCC(Power supply 4.5V-5.5V) / GND(ground)
6Pin male header is pre-soldered.
You can plug female/male dupont cable directly with breadboard or other development board which has female header onboard.
Dimension: 4.2cmX2.4cm(1.65inX0.94in)
Interface level: 5V or 3.3V
Power supply: 4.5V to 5.5V, onboard 3.3V regulator circuit
Currency: 0.2-200mA
Communication interface: SPI
Positioning holes:
4 M2 screws positioning holes with a diameter of 2.2mm, so the module is easy to install positioning, to achieve inter-module combination.
Micro SD card connector:
This SD card module has a self-elastic card holder, which allows you to easily insert the card for easy operation.
3.3V regulator circuit:
LDO regulator output 3.3V for level conversion chip, Micro SD card supply.
Level conversion circuit:
Micro SD card to signal the direction of converts 3.3V, MicroSD card interface to control the direction of the MISO signal is also converted to 3.3V, general AVR microcontroller systems can read the signal.
Connection diagram display 1
Connection diagram display 2
How to use
If you use Arduino 2560, you need correct the CS pin number in the code. (chipselect=53)
The brands and models mentioned above are only used to show the suitability of the products.
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan