Atur jumlah dan catatan
Stok Total: 20
Subtotal
Rp824.000
Drone RC Flight Simulator JTL-0904A Support Real HV 7 G7 6Chanel
Rp824.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Features:
3. Language:. inese and Enh
4. Installing Environment:. 32 bits, 64bits XP, Windows7, Windows8, Windows10, Vista
Simulator handle support:
New G7.0, G6.5, - G4
New Phoenix 5.0 - 2.5version XTR
Kindly Remark for Installation:
1. Firstly try to find the ""autorun"" icon in CD, this is quick installation guide.
2. Before run any program, pls install the ""DirectX9.0"" in CD.
Or swit the swit in the lower right corner of the USB emulator handle - four sliding gears for you to oose.
4. After running Simulator Switer to select the software name, run G7.0 or Phoenix 5.0 XTR
1. 27418829-E1-5140106092
2. 22850737-E2-3850104361
3. 78396652-E3-7440103834
4. 13144997-E4-6630107326
5. 78779710-E5-8790101628
6. 67920032-E6-7880104031
7. 90638630-E7-7730148192
8. 64658044-E8-1910121237
9. 35589764-H1-0040109905
10. 49778064-A1-0040109998
1.in order to XTR as an example: steps can not be wrong! Pull the analog swit to XTR logo Department, will simulate remote-controlled USB lint plug into your computer, then open the simulated remote control power swit, this time the remote control power lantern kept flashing if not swited on, the computer interface, no, need to Another ange computer interface, the operation sequence above still need to operate once.
2. a good XTR software installed, open the software, point the top of the directory bar ""remote control"" and then point the pop-up "" distribution"", the is set above diagram, the signal can not be set if there is no allocation, then replace the computer's USB interface else is even trying.
This is a remote control flight simulator connected to a computer
3. Language:. inese and Enh
4. Installing Environment:. 32 bits, 64bits XP, Windows7, Windows8, Windows10, Vista
Simulator handle support:
New G7.0, G6.5, - G4
New Phoenix 5.0 - 2.5version XTR
Kindly Remark for Installation:
1. Firstly try to find the ""autorun"" icon in CD, this is quick installation guide.
2. Before run any program, pls install the ""DirectX9.0"" in CD.
Or swit the swit in the lower right corner of the USB emulator handle - four sliding gears for you to oose.
4. After running Simulator Switer to select the software name, run G7.0 or Phoenix 5.0 XTR
1. 27418829-E1-5140106092
2. 22850737-E2-3850104361
3. 78396652-E3-7440103834
4. 13144997-E4-6630107326
5. 78779710-E5-8790101628
6. 67920032-E6-7880104031
7. 90638630-E7-7730148192
8. 64658044-E8-1910121237
9. 35589764-H1-0040109905
10. 49778064-A1-0040109998
1.in order to XTR as an example: steps can not be wrong! Pull the analog swit to XTR logo Department, will simulate remote-controlled USB lint plug into your computer, then open the simulated remote control power swit, this time the remote control power lantern kept flashing if not swited on, the computer interface, no, need to Another ange computer interface, the operation sequence above still need to operate once.
2. a good XTR software installed, open the software, point the top of the directory bar ""remote control"" and then point the pop-up "" distribution"", the is set above diagram, the signal can not be set if there is no allocation, then replace the computer's USB interface else is even trying.
This is a remote control flight simulator connected to a computer
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan