Brand Name: Roarkit
Dapat digunakan untuk Raspberry Pi Zero tapi harus menggunakan kabel:
https://www.tokopedia.com/makersworkshop/raspberry-pi-zero-camera-cable-16cm-fpc-for-rpi-camera-module-v1-3https://www.tokopedia.com/makersworkshop/raspberry-pi-zero-camera-cable-30cm-fpc-for-rpi-camera-module-v1-3Raspberry Pi compatible camera module supports both Model A and Model B+ version of the raspberry pi, light-sensitive chip used in the module is produced by a quarter inch OmniVision OV5647 chip, can be connected directly with raspberry soft cable sent by the control board. It is equipped with 5 million pixel image sensor, can record 30 frames per second (no Caton) 1080p Full HD video, or capture 2592x1944 resolution images, and you can also send raspberry installed in your small car, by Wi-Fi wireless monitoring production car. You can also apply image recognition and image tracking, creativity, wonderful moment in the brain.
Parameters:
Lens: 1/4 5M
Aperture: 2.9
Focal Length: 3.29
FOV: 72.4 degrees
Hardware connection:
1. soft cable, 90-degree vertical connector, HDMI port next to it. When connecting the contact side facing the HDMI interface.
2. Remove the protective film before the lens
3. bare boards, note ESD damage, beware of static electricity!
Software:
1. RPi firmware and raspi-config has been updated to the camera, do a apt-get update; apt-get upgrade;
2. raspi-config, select the camera, start RPi firmware camera driver, then reboot
3. Use the command-line program raspivid and raspistill operating camera to capture video clips or images
The captured video clips need to play with mplayer
Note: (Raspberry Pi board is not included)