ARDUINO UNO R3 CH340G ROBOTDYN UNO R3 CH340G ORIGINAL BARU

Uno R3 - compatible with Arduino Uno R3 board. Built on the Atmel ATmega328 microcontroller and USB-UART interface chip CH340G. Board for functionality similar to the Arduino Uno (ATmega 168/328). It is a budget, but the same stable, and uses the original chips Atmel ATmega (16 MHz). The board used the chip CH340G as converter UART-USB. Chip CH340G - is a budget solution. When you work in the frequency 12Mhz, giving a stable result of data exchange (need install drivers to computer). Uno R3 - connects to the computer via micro USB cable (used for almost all Android smartphones). You can supply power to board through the Micro USB connector or DC-jack. The voltage regulator (LDO) can deal with incoming voltage from 6V to 12V DC. Output current for 5V - about 800mA, for 3.3V - about 180mA (Please note that the higher the input voltage the lower the outgoing current). That will provide a reliable power most of your initial projects. We recomiende supply 7-9V. SPESIFIKASI : * Microcontroller : ATMega328 * USB-TTL converter : CH340G * Power Out : 5V-800mA * Power IN. USB : 3.3V (180mA max.) * Power IN. VIN/DC Jack : 7-9V * Power Consumption : 5V 800mA * Logic Level : 5V * USB : Micro USB * Clock Frequency : 16MHz * Operating Supply Voltage : 5V * Digital I/O : 14(6-PWM) * Analog I/O : 8 * Memory Size : 16Kb/32 Kb * Data RAM Type/Size : 2Kb * Data ROM Type/Size : 1Kb * Interface Type : ISP * Operating temperature : 40/+85 * LengthWidth : 53.3468.58mm KELENGKAPAN : * 1pcs ROBOTDYN UNO R3 CH340G Komponen pendukung atau alternatif yang mungkin antum butuhkan : - UNO R3 SMD CLONE WITHOUT CABLE