Atur jumlah dan catatan
Stok Total: 11
Subtotal
Rp465.000
FC Betafpv Lite V3 Brushed Motor Build In FrSky D8 and VTX 25mW BT2.0
Rp465.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Mainan Remote Control
Know More About V3 :
- Built-in SPI Frsky receiver with D8 protocol.
- PC Configurator is available for FC tuning and firmware flashing.
- Integrate 25mW VTX, support change VTX channel brand via remote control.
- Add LiteOSD information and OSD Menu.
Key Features
The V3 board comes pre-flashed with LiteSilver firmware. This must be the most simple and affordable method to try whoop FPV racing hobby.
Pilot could tune the FC board via the PC Configurator released with the V3 board at the same time.
Built in Frsky D8 protocol native receiver, compatible with almost radio transmitter in the market. No need additional external Bayang TX module as V2 board.
Pre-soldered 55mm power cable pigtail with BT2.0 connector. So that pilot could try all features of this popular connector without any modification.
Specifications
CPU: MM32F103KBU6
ESC: All FETs are rated at 6.3A maximum. Support 6x15mm/7x20mm/8x20mm/8.5x20mm etc motors.
Size: 26mm x 26mm, fully compatible with the Inductrix quad frame and mounting pattern
Firmware version: LiteSilver V3 firmware
Receiver: Built-in SPI Frsky with D8 protocol
Power Cable: 55mm, with BT2.0 connector
Port: External USB Type-C
Weight: 3.2g
LiteSilver Firmware
LiteSiver is the next generation firmware developed by BETAFPV for whoop FPV drones. The idea of most features in this firmware is from the popular Silverware firmware. Comes with the V3 board, the PC configutator is also available. It has the ability to change settings for custom builds, or to adapt to personal preferences.
Package
1 * BETAFPV Lite Brushed Flight Controller V3
1 * USB Type-C adapter
4 * M1.2x4mm screws (Fit for stock Inductrix frame)
4 * M1.4x5mm screws (Fit for Beta75 etc 75mm frame)
4 * Anti-vibration ruber dampers
- Built-in SPI Frsky receiver with D8 protocol.
- PC Configurator is available for FC tuning and firmware flashing.
- Integrate 25mW VTX, support change VTX channel brand via remote control.
- Add LiteOSD information and OSD Menu.
Key Features
The V3 board comes pre-flashed with LiteSilver firmware. This must be the most simple and affordable method to try whoop FPV racing hobby.
Pilot could tune the FC board via the PC Configurator released with the V3 board at the same time.
Built in Frsky D8 protocol native receiver, compatible with almost radio transmitter in the market. No need additional external Bayang TX module as V2 board.
Pre-soldered 55mm power cable pigtail with BT2.0 connector. So that pilot could try all features of this popular connector without any modification.
Specifications
CPU: MM32F103KBU6
ESC: All FETs are rated at 6.3A maximum. Support 6x15mm/7x20mm/8x20mm/8.5x20mm etc motors.
Size: 26mm x 26mm, fully compatible with the Inductrix quad frame and mounting pattern
Firmware version: LiteSilver V3 firmware
Receiver: Built-in SPI Frsky with D8 protocol
Power Cable: 55mm, with BT2.0 connector
Port: External USB Type-C
Weight: 3.2g
LiteSilver Firmware
LiteSiver is the next generation firmware developed by BETAFPV for whoop FPV drones. The idea of most features in this firmware is from the popular Silverware firmware. Comes with the V3 board, the PC configutator is also available. It has the ability to change settings for custom builds, or to adapt to personal preferences.
Package
1 * BETAFPV Lite Brushed Flight Controller V3
1 * USB Type-C adapter
4 * M1.2x4mm screws (Fit for stock Inductrix frame)
4 * M1.4x5mm screws (Fit for Beta75 etc 75mm frame)
4 * Anti-vibration ruber dampers
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan