JUAL LAMPU EXPLOSION PROOF 2x36 WATT (2x18 LED) EVFP ITALSMEA TECHNOR

EVF-P lighting fixtures are manufactured with an high resistance cylindrical polycarbonate lamp housing and with end cups made of corrosion resistant copper free aluminium. Polycarbonate lamp housing is a three layers-extrusion UV resistant able to grant the best protection against sun rays and related yellowing effect, Circular shape grants the best possible “CX” factor, therefore it is less affected by winddusts, no flat surfaces to avoid pollution and dirty bunching, Components and design make EVF-P lighting fixtures suitable for high corrosion environments, To increase further surface protection, upon request it is possible to apply an OFFSHORE painting cycle suitable for marine environments. All lighting fixtures are supplied ready for LOOP IN-LOOP OUT facility with 4sqmm cable. TECHNICAL FEATURES Material End cups in aluminium with low content of copper / Light housing in polycarbonate IP rating : IP66/IK10 according to EN 62262:2002 Ambient temperature range -20°C to +55°C Approvals INERIS 02ATEX0039X (standard) / TR CU (marking upon request, ordering code to be required) Marking II 2 GD Ex e mb IIC T4 Gb (Normal service) / Ex d e mb IIC T4 Gb (Emergency service) EX de IIC T4 Gb (available upon request) Ex tb IIIC T85°C Db IP66 Gaskets O-ring made of Nitrile Rubber (NBR) Surface treatment End cups painted by green colour polyurethane painting cycle RAL6003 (other colour available upon request) Entries N° 2 entries M20x1,5. One plugged-off by Ex d brass nickel chrome plated plug and relevant gasket. Hardware and screws AISI304 Stainless steel external hardware and screws Lamps EVF-P series lighting fixtures are suitable for two pins fluorescent lamps G13 socket Philips TL-D or equivalent (lamps excluded) Ballast High frequency electronic ballast conforming with EN 60079 – 18 and IEC 60079 – 18 Rated operation voltage (UE) 110 – 240 (normal service) - 230- 240 (Emergency service) Frequency 0/50