XD-621 Tombol Saklar Sensor Sentuh AC 220V Touch ON OFF Switch Mirror DIY Lampu Led Cermin 500W

On/Off Touch Switch for Mirror Lamp Lighting LED Accessories 50/60Hz XD-621

Specifications:
Working voltage: AC170 to 240V 50 or 60Hz
Load power:≤500W
Main Machine Size: 75 x 43 x 21mm or 2.95 x 1.69 x 0.82inch(L X W X H)
Touch switch Size: approx. 50 x 35 x 16mm or 1.96 x 1.37 x 0.62"

Features:
1. This switch is an isolated touch sensor switch, applicable to all types of lamps on the medium(such as glass, acrylic, plastic , ceramic, etc.)
2. High safety performance, long lifespan, beautiful and generous, is the first choice of making top grade products
3. Can ensure customers safe, effectively prevent the interference of the outside world and the outside world.
Wires Connection:
Red and black wire connects AC 220V output; the other black and blue line connect lamp.

2. Installation process:
Note: Before installation, please turn off the main power.
* Set a touch point in the mirror, the diameter of the contact point should be 9-10mm, first of all, must remove the mercury from mirror around the point of contact, the size for the removable mercury should be 1.5-2mm;

* Make a grid in the middle of the touch point, there are three lines of arrow on the cover of the switch, when install, the three lines of arrow should align any of the three lines of the lattice, can touch to control whether after align the direction, now remove the paster from the touch plate, and then can install the touch switch on the mirror, after that you can correct it using other things in order to avoid falling.