5.0/ 5.0
100% pembeli merasa puas
2 rating • 0 ulasan
5(2)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 100
Subtotal
Rp176.000
Weicon Galva Spray 400ml Metal Protection Pelapis Logam Anti Karat
Rp176.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Pertukangan
NOTE : Untuk Pengiriman Luar Pulau Jawa, wajib pilih Kurir AnterAja Kargo / JNE Trucking / REX
Tidak bisa menggunakan Kurir Lain sebab barang mengandung cairan/gas dan tidak lolos X-Ray Bandara !!!
Cathodic corrosion protection
QUALITY: 100% German Quality
WEICON Galva Spray - Protective Coating for metal surfaces against rust & corrosion
Features :
- Long-lasting cathodic corrosion protection
- Colour shade matching hot-dip galvanization
- Protects metals against rust and corrosion and is fast-drying and strongly adherent
Application :
The spray can be used for repairing hot galvanized parts with matching colours, as highly effective antirust primer, e.g. for car bodypainting, as coating on welded joints and drill holes, and as conductive intermediate layer in spotwelding
PROCESSING: Shake can before use until stirring ball is clearly audible. Spray evenly in a cross-coat at room temperature (approx. +20°C) at a distance of approx. 25 cm.
Dust dry after approx. 15 min., fully cured in approx. 10-12 hours.
STORAGE: Container is under pressure. Protect from sunlight and temperatures above +50°C.
Tidak bisa menggunakan Kurir Lain sebab barang mengandung cairan/gas dan tidak lolos X-Ray Bandara !!!
Cathodic corrosion protection
QUALITY: 100% German Quality
WEICON Galva Spray - Protective Coating for metal surfaces against rust & corrosion
Features :
- Long-lasting cathodic corrosion protection
- Colour shade matching hot-dip galvanization
- Protects metals against rust and corrosion and is fast-drying and strongly adherent
Application :
The spray can be used for repairing hot galvanized parts with matching colours, as highly effective antirust primer, e.g. for car bodypainting, as coating on welded joints and drill holes, and as conductive intermediate layer in spotwelding
PROCESSING: Shake can before use until stirring ball is clearly audible. Spray evenly in a cross-coat at room temperature (approx. +20°C) at a distance of approx. 25 cm.
Dust dry after approx. 15 min., fully cured in approx. 10-12 hours.
STORAGE: Container is under pressure. Protect from sunlight and temperatures above +50°C.
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan