British Portable Pendulum Skid Resistance and Friction Tester

Instruction:
The pendulum friction coefficient tester is a dynamic pendulum impact instrument. It is developed
according to the basic principle that "the potential energy loss of the pendulum is equal to the
work done to overcome the friction of the road when the rubber film at the end of the pendulum
slips on the road surface".
Base:
1. consists of T - leg, leveling screw and leveling bubble.
2. A column consisting of a column, a lifting mechanism, a guide rod, and an instrument handle,
used for lifting and fixing the position of a swinging head.
3. Release Switch: A switch mounted on a cantilever to hold the pendulum horizontally and
release the pendulum.
4. Steering system: includes fastening handles, swinging shafts, steering joints and bearings,
hoisting, fixing position, guaranteed in The swinging plane can swing freely.
5. Coefficient system: including pointer felt ring, press cover, pointer adjust nut and dial, pointer
can refer directly to The pendulum value is shown.
6. Hammer head: by upper and lower joint, pendulum rod, spring, lever, lifting handle, hammer
shell, slippage block and rubber film(76 mm ×25.4 mm ×6.35 mm) consisting of a specified
torque on the swing center and a specified pressure on the pavement .Before and after, left and
right torque balance, it is a measure of road friction coefficient.