GVM SLIDER-80 Wireless Carbon Fiber Motorized Camera Slider Parallax

Instead of using a hardwired controller, the 31" Wireless Carbon Fiber Motorized Camera Slider from GVM lets you manage and control the motorized motion via an iOS/Android app from your smartphone or tablet. Set A to B travel points and keyframed time-lapse sessions over a wireless Bluetooth connection, and capture smooth and professional-looking video and images. This belt-driven slider can be used in horizontal as well as tripod-mount inclined setups, with up to 11 lb cameras supported horizontally. A ball head is included with the slider so that you can easily adjust the tilt and swivel position of your camera. A bubble level is built into the slider carriage for checking your camera's balance.

The mobile app allows you to set the sliding speed from 1 to 100%. The app has two modes: manual and automatic. In manual mode, you can just control back and forth slides from the app, and in auto mode, you can assign specific travel points and round-trip motion. For time-lapse shots

Additional Features
-The slider can traverse the 32" sliding range in a minimum time of 11.4 seconds to a maximum of 123 seconds in video mode
-In time-lapse mode, the speed range is 114 seconds to 22 minutes and 30 seconds at the slowest
-Companion mobile app downloadable for free for iOS and Android

Spesification:
Sliding System: Belt-Driven Sliding System
Load Capacity: 11 lb / 5.0 kg (Horizontal)
Travel Distance: 31" / 78.7 cm
Tripod Mounting: 1/4"-20 Female Thread
3/8"-16 Female Thread
Material: Carbon Fiber
Camera Mounting Screw: 1/4"-20 Male & 3/8"-16 with Bushing
Wireless Connectivity: Bluetooth
Track Length: 31.5" / 80.0 cm, Including Legs

Pakcage Include:
1x GVM Wireless Carbon Fiber Motorized Camera Slider (31")
1x Ball Head
1x L-Series NP-F750 Battery
1x Battery Charger
6x Camera Control Cable
1x Extension Cable
1x Carry Case